A corrective assembly method using a buffer in a high-precision machining-assembly production system

摘要

Electric relay manufacture and assembly is an example of high-precision machining followed by an assembly process. During machining, parts exhibit dimensional variance and manufacturers have several techniques and strategies for how to maximise production and improve efficiency when variance is present. One approach is to measure the variance, select parts appropriately for the best match, perform the minimum amount of adjustment and rework, and then perform the assembly. This approach is difficult in practice because measurement errors also occur and confound the knowledge about each part's dimensions. In this paper, we consider a new matching approach to increase the production rate. We propose a part-combination selection method in which a pair of assembly parts in buffers is optimally selected using a target of an estimated assembly error, and an adjustment machine is then optimally selected using a range of estimated assembly errors. Furthermore, we consider an analytical approach to estimate the optimal control parameters for the proposed method that yield the maximum production rate. The analysis results show that the analytical approach can estimate the nearly optimal control parameters, including the nearly maximum production rate in any buffer capacity. The results also show that by installing a small buffer capacity, the production rate can be increased.