Combinatorial optimization of weld sequence by using a surrogate model to mitigate a weld distortion

摘要

Choosing an optimal sequence from the set of all possible combinations of a weld's sub-passes is always a challenge for designers. The solution of such combinatorial optimization problems is limited by the available resources. For example, having n sub-passes leads to choosing from 2" x n possible combinations of the sub-passes, e.g., 46,080 for n = 6. It is not feasible to choose the optimal sequence by evaluating all possible combinations either experimentally or by simulation models. The purpose of using a surrogate model based on a simulation model is to find the solution in the space of all possible combinations with a significant decrease in computational expenses. In effect, the surrogate model constructs an approximation model from some combinations of solutions of a more expensive model to mimic the behavior of the simulation model as closely as possible but at a much lower computational cost. This surrogate model, then, could be used to approximate the behavior of the other combinations. In this paper, a surrogate model is demonstrated that minimizes the distortion in a pipe girth weld with six sub-passes by analyzing only 14 combinations of sub-passes from total of 48 possible combinations. A comparison between the results of the surrogate model and the full transient FEM analysis all possible combinations shows the accuracy of the algorithm/model.