首页>外文期刊>一般工业技术>工程技术科学>International journal of mechanics and materials in design

International journal of mechanics and materials in design

SCIEI

中文名称：国际设计力学与材料杂志

ISSN：1569-1713
出版周期：Quarterly

发文量：464

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.A material point method model and ballistic limit equation for hyper velocity impact of multi-layer fabric coated aluminum plate

机译：多层织物涂层铝板超高速冲击的材料点方法模型和弹道极限方程
- 作者：Ye Zhiping;Zhang Xiong;Zheng Gangtie;Jia Guanghui
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
2.Phase field simulations of coupled microstructure solidification problems via the strong form particle difference method

机译：用强形式粒子差分法模拟耦合微结构凝固问题的相场模拟
- 作者：Song Jeong-Hoon;Fu Yao;Kim Tae-Yeon;Yoon Yeong-Cheol;Michopoulos John G.;Rabczuk Timon
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
- Microstructure;
- Polycrystalline;
- Solidification;
- Phase field model;
- Strong form;
- Point collocation;
3.Enhanced magnetoelectric effect in multiferroic composite beams due to flexoelectricity and transverse deformations

机译：弯曲电和横向变形增强了多铁性复合梁的磁电效应
- 作者：Ray M. C.
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
- Flexoelectricity;
- Piezoelectricity;
- Magnetoelectric coefficient;
- Nanobeams;
- Multiferroic composite;
4.Scavenging phenomenon and improved electrical and mechanical properties of polyaniline-divinylbenzene composite in presence of MWCNT

机译：MWCNT存在下聚苯胺-二乙烯基苯复合物的清除现象及改善的机电性能
- 作者：Kumar Vipin;Yokozeki Tomohiro;Goto Teruya;Takahashi Tatsuhiro;Sharma Sushant;Dhakate Sanjay R.;Singh Bhanu P.
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
- Polyaniline;
- MWCNT;
- Scavenging effect;
- Electrical conductivity;
- CFRP;
5.Nonlinear transient dynamic response of a blade subject to a pulsating load in a decaying centrifugal force field

机译：叶片在衰减离心力场中承受脉动载荷的非线性瞬态动态响应
- 作者：Roy P. A.;Meguid S. A.
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
6.Evaluation of piezoelectric energy harvester under dynamic bending by means of hybrid mathematical/isogeometric analysis

机译：混合数学/等几何分析法评估动态弯曲下的压电能量采集器
- 作者：Akbar Mahesa;Curiel-Sosa Jose Luis
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
- Piezoelectric;
- Energy harvester;
- Dynamic bending;
- Non-uniform rational B-spline (NURBS);
- Isogeometric analysis (IGA);
7.Asymmetric buckling of shell-stiffened annular plates

机译：加壳环形板的不对称屈曲
- 作者：Burmeister Daniel
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
- Buckling;
- Annular plate;
- Shell-stiffening;
- Elastically restrained edge;
- Galerkin function;
8.Optimization of material composition to minimize the thermal stresses induced in FGM plates with temperature-dependent material properties

机译：优化材料成分，以使具有温度相关材料特性的FGM板引起的热应力最小化
- 作者：Ding Shuang;Wu Chih-Ping
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
9.Vibration characteristics of moving sigmoid functionally graded plates containing porosities

机译：含孔隙的移动S型功能梯度板的振动特性
- 作者：Wang Yan Qing;Zu Jean W.
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
- Sigmoid functionally graded material plate;
- Porosity;
- Moving;
- Vibration;
- Method of harmonic balance;
10.Damage effects of adhesives in modern glass facades: a micro-mechanically motivated volumetric damage model for poro-hyperelastic materials

机译：现代玻璃幕墙中胶粘剂的损伤效应：多孔超弹性材料的微机械驱动体积损伤模型
- 作者：Drass Michael;Schneider Jens;Kolling Stefan
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
11.Hybrid molecular dynamics-finite element simulations of the elastic behavior of polycrystalline graphene

机译：多晶石墨烯弹性行为的混合分子动力学有限元模拟
- 作者：Alian A. R.;Meguid S. A.
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
- Polycrystalline graphene;
- Grain boundaries;
- Multiscale modeling;
- Molecular dynamics;
- Finite element;
- Elastic properties;
12.Contact mechanics and friction in PTFE coaxial sealing systems

机译：PTFE同轴密封系统中的接触力学和摩擦
- 作者：Deaconescu Tudor;Deaconescu Andrea;Sarbu Flavius
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
- Coaxial sealing systems;
- Sealing tribosystem;
- Friction force;
- Mixed friction;
13.Effects of natural aging and heat treatments conditions on mechanical properties of dissimilar composite between 6061 Al alloy and Al-Sil2CuNi (AC8A) Al cast alloy fabricated by friction welding

机译：自然时效和热处理条件对6061铝合金与摩擦焊接Al-Sil2CuNi（AC8A）铸造铝合金异种复合材料力学性能的影响
- 作者：Kimura M.;Sakaguchi H.;Kusaka M.;Kaizu K.;Takahashi T.
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
- Dissimilar composite;
- 6061 aluminium alloy;
- Al-Si12CuNi cast aluminium alloy;
- Natural aging treatment;
- Heat treatment;
14.A 2D topology optimisation algorithm in NURBS framework with geometric constraints

机译：NURBS框架中具有几何约束的二维拓扑优化算法
- 作者：Costa Giulio;Montemurro Marco;Pailhes Jerome
- 期刊名称：《International journal of mechanics and materials in design》 | 2018年第4期
- Topology optimisation;
- NURBS surfaces;
- Finite element method;
- CAD-compatibility;
- Structural optimisation;
15.Message from the Editor-in-Chief

机译：总编辑致辞
- 作者：Meguid Shaker A.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第1期
16.Nonlinear multibody dynamics and finite element modeling of occupant response: part Ⅱ-frontal and lateral vehicle collisions

机译：乘员响应的非线性多体动力学和有限元建模：第二部分-正面和侧面车辆碰撞
- 作者：Shi Mo Gabriel;Hassan Mohamed T. Z.;Meguid S. A.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第1期
- Nonlinear;
- Finite element;
- Multibody dynamics;
- Occupant kinematics;
- Vehicular collision;
17.Prediction of the dynamic equivalent stiffness for a rubber bushing using the finite element method and empirical modeling

机译：使用有限元方法和经验模型预测橡胶衬套的动态等效刚度
- 作者：Lee Hyun Seong;Shin Jae Kyong;Msolli Sabeur;Kim Heung Soo
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第1期
- Rubber bushing;
- Finite element method;
- Overlay method;
- Empirical model;
- Dynamic equivalent stiffness;
18.Stochastic analysis of interphase effects on elastic modulus and yield strength of nylon 6/clay nanocomposites

机译：相间对尼龙6 /粘土纳米复合材料弹性模量和屈服强度的影响的随机分析
- 作者：Zolfaghari Hossein;Silani Mohammad;Yaghoubi Vahid;Jamshidian Mostafa;Hamouda Abdel Magid
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第1期
- Nylon 6;
- clay nanocomposites;
- Interphase;
- Computational homogenization;
- Stochastic analysis;
- Sensitivity analysis;
19.Atomic-scale finite element modelling of mechanical behaviour of graphene nanoribbons

机译：石墨烯纳米带力学行为的原子尺度有限元建模
- 作者：Damasceno D. A.;Mesquita E.;Rajapakse R. K. N. D.;Pavanello R.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第1期
- Atomistic simulation;
- Elastic modulus;
- Graphene;
- Nanoribbons;
- Tensile strength;
20.Three-dimensional elastoplastic solids simulation by an effective IGA based on Bezier extraction of NURBS

机译：基于NURBS Bezier提取的有效IGA三维弹塑性固体模拟
- 作者：Yu Tiantang;Lai Wenjiang;Tinh Quoc Bui
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第1期
- 3D elasto-plastic problems;
- Isogeometric analysis;
- NURBS;
- Bezier extraction;
- FEM;
- Numerical methods;
21.Nonlinear multibody dynamics and finite element modeling of occupant response: part Ⅰ-rear vehicle collision

机译：乘员响应的非线性多体动力学和有限元建模：第一部分-车辆后方碰撞
- 作者：Hassan Mohamed T. Z.;Shi Mo Gabriel;Meguid S. A.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第1期
- Whiplash;
- Rear impact;
- Nonlinear;
- Finite element;
- Multibody dynamics;
- Occupant kinematics;
22.Automated generation of physical surrogate vehicle models for crash optimization

机译：自动生成物理替代车辆模型以进行碰撞优化
- 作者：Schaeffer Michael;Sturm Ralf;Friedrich Horst E.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第1期
- Crashworthiness;
- Physical surrogates;
- Simplified models;
- Automated model generation;
- Optimization;
- Computational time;
23.Structural behavior of double-lap shear adhesive joints with metal substrates under humid conditions

机译：潮湿条件下与金属基材的双搭接剪切粘合接头的结构行为
- 作者：Machalicka Klara;Vokac Miroslav;Kostelecka Michaela;Eliasova Martina
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第1期
- Double lap shear;
- Adhesive;
- Metal substrate;
- Ageing;
- Water immersion;
24.Robustness and reliability of composite structures: effects of different sources of uncertainty

机译：复合结构的稳健性和可靠性：不同不确定性来源的影响
- 作者：Carneiro Goncalo das Neves;Antonio Carlos Conceicao
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第1期
- Uncertainty;
- Reliability-based robust design optimization;
- Multi-objective optimization;
- Composite structures;
25.Nonlinear reduced-order modeling and effectiveness of electrically-actuated microbeams for bio-mass sensing applications

机译：用于生物质感测应用的电动微束的非线性降阶建模和有效性
- 作者：Ghommem M.;Abdelkefi A.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第1期
- Bio-mass sensor;
- Reduced-order model;
- Nonlinear dynamics;
- Electric actuation;
- Perturbation techniques;
26.Reflection of plane waves at the initially stressed surface of a fiber-reinforced thermoelastic half space with temperature dependent properties

机译：平面波在纤维增强的热弹性半空间的初始受力表面处的反射，具有温度依赖性
- 作者：Deswal Sunita;Punia Baljit Singh;Kalkal Kapil Kumar
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第1期
- Reflection;
- Anisotropic material;
- Fiber-reinforced;
- Initial stress;
- Temperature dependent elastic modulus;
- 74A15;
- 80A20;
27.Mode localization phenomenon of functionally graded nanobeams due to surface integrity

机译：由于表面完整性而导致的功能梯度纳米束的模式定位现象
- 作者：Shaat Mohamed
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Vibration;
- Mode localization;
- Zero-frequency mode;
- Roughness;
- Nanobeams;
28.A comparison of rubber stress relaxation models for conveyor belt indentation rolling resistance calculations

机译：用于输送带压痕滚动阻力计算的橡胶应力松弛模型的比较
- 作者：Munzenberger Paul J.;OShea Jayne I.;Wheeler Craig A.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Belt conveying;
- Indentation rolling resistance;
- Stress relaxation;
29.Vibroacoustic analysis of thermo-elastic laminated composite sandwich curved panel: a higher-order FEM- BEM approach

机译：热弹性层压复合夹层曲面板的振动声分析：一种高阶FEM-BEM方法
- 作者：Sharma Nitin;Mahapatra Trupti Ranjan;Panda Subrata Kumar
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Composite sandwich curved panel;
- Thermal environment;
- HSDT;
- FEM-BEM;
- Acoustic radiation;
- MATLAB computer code;
30.Robust topology optimization formulation including local failure and load uncertainty using sequential quadratic programming

机译：稳健的拓扑优化公式，包括使用顺序二次编程的局部故障和负载不确定性
- 作者：Long Kai;Wang Xuan;Du Yixian
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Topology optimization;
- Reciprocal SIMP method;
- Sequential quadratic programming;
- Load uncertainty;
- Fail-safe design;
31.Spectral element method for vibration analysis of three- dimensional pipes conveying fluid

机译：三维三维流体管道振动分析的谱元法
- 作者：Zhu Hong-zhen;Wang Wei-bo;Yin Xue-wen;Gao Cun-fa
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Spectral element method;
- Vibration;
- Three-dimensional pipe;
- Fluid;
32.An enhanced square-grid structure for additive manufacturing and improved auxetic responses

机译：用于增材制造的增强型方格结构和改善的拉力响应
- 作者：Meena K.;Calius E. P.;Singamneni S.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Auxetic structures;
- Additive manufacturing;
- Finite element;
- Negative Poisson's ratios;
33.Electro-viscoelastic performance of a tubular dielectric elastomer actuator

机译：管状介电弹性体执行器的电粘弹性性能
- 作者：He Tianhu;Wang Zhengang
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Soft active material;
- Dielectric elastomer membrane;
- Viscoelasticity;
- Electromechanical performance;
- Instability;
34.Thermomechanical nonlinear in-plane analysis of fix-ended FGM shallow arches on nonlinear elastic foundation using two-step perturbation technique

机译：非线性弹性地基上固定端FGM浅拱的热力非线性面内分析的两步扰动技术
- 作者：Babaei H.;Kiani Y.;Eslami M. R.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
35.Nonlinear performance analysis of forced carbon nanotube- based bio-mass sensors

机译：基于强制碳纳米管的生物质传感器的非线性性能分析
- 作者：Ali-Akbari H. R.;Ceballes S.;Abdelkefi A.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Carbon nanotubes;
- Nonlinear vibrations;
- Bio-mass sensing;
- Eringen's nonlocal elasticity;
- Method of Multiple Scales;
36.Vibration analysis of circular cylindrical shells made of metal foams under various boundary conditions

机译：各种边界条件下金属泡沫圆柱壳的振动分析
- 作者：Wang Yan Qing;Ye Chao;Zu Jean W.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Metal foam;
- Circular cylindrical shell;
- Free vibration;
- Love's shell theory;
- Rayleigh-Ritz method;
37.Investigating the cold spraying process with the material point method

机译：用材料点法研究冷喷涂工艺
- 作者：Liu Yan;Xu Chenyang
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Cold spray;
- High-velocity impact;
- Metal jetting;
- Mechanical interlocking;
- Meshfree particle methods;
- Material point method;
38.Crack interaction study in piezoelectric materials under thermo-electro-mechanical loading environment

机译：机电载荷环境下压电材料的裂纹相互作用研究
- 作者：Mishra Ranjan;Burela Ramesh Gupta;Pathak Himanshu
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Crack interaction;
- Piezoelectric;
- Thermo-electro-mechanical loading;
- SIFs;
- XFEM;
39.Effect of flexoelectricity on the electromechanical response of graphene nanocomposite beam

机译：弯曲电对石墨烯纳米复合材料束机电响应的影响
- 作者：Kundalwal S. I.;Shingare K. B.;Rathi Ankit
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Graphene;
- Flexoelectricity;
- Piezoelectricity;
- Nanocomposite;
- Micromechanics;
- Finite element;
40.Size-dependent nonlinear vibration of an electrostatic nanobeam actuator considering surface effects and inter-molecular interactions

机译：考虑表面效应和分子间相互作用的静电纳米束致动器的尺寸依赖性非线性振动
- 作者：Esfahani Saman;Khadem Siamak Esmaeilzade;Mamaghani Ali Ebrahimi
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
41.Dynamic reliability analysis model for structure with both random and interval uncertainties

机译：具有随机和区间不确定性的结构动态可靠性分析模型
- 作者：Shi Yan;Lu Zhenzhou
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Dynamic reliability analysis;
- Hybrid input variables;
- Non-probabilistic reliability index;
- Kriging surrogate;
42.A distributed parametric model of Brinson shape memory alloy based resonant frequency tunable cantilevered PZT energy harvester

机译：基于布林森形状记忆合金的共振频率可调悬臂式PZT能量采集器的分布式参数模型
- 作者：Vasundhara M. G.;Senthilkumar M.;Kalavathi G. K.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Tunable;
- Shape memory alloy;
- Energy harvester;
- PZT;
- Cantilever;
43.A size-dependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation

机译：基于尺寸的精确理论，用于在弹性基础上重新束缚温度相关的FG多层GPLRC复合纳米结构的热屈曲，自由和强迫振动分析
- 作者：Safarpour Hamed;Hajilak Zanyar Esmailpoor;Habibi Mostafa
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
44.Bayesian inference in validation of global MPP for the reliability analysis of composite structures

机译：贝叶斯推断在全局MPP验证中的应用
- 作者：Hoffbauer Luisa N.;Antonio Carlos C.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Uncertainty;
- Reliability;
- Composite structures;
- Inverse optimization;
- Bayesian estimation;
- Sensitivity;
45.A novel hybrid-Trefftz finite element for symmetric laminated composite plates

机译：对称层压复合板的新型混合Trefftz有限元
- 作者：Ray M. C.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Trefftz finite element;
- Composite structures;
- Finite element analysis;
46.Exact solutions for flexoelectric response in elastic dielectric nanobeams considering generalized constitutive gradient theories

机译：考虑广义本构梯度理论的弹性电介质纳米束中柔电响应的精确解
- 作者：Sidhardh Sai;Ray M. C.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Strain gradient elasticity;
- Nanobeam;
- Flexoelectric solids;
- Exact solutions;
- Nanosensors;
47.Thermomechanical investigation of unidirectional carbon fiber-polymer hybrid composites containing CNTs

机译：含碳纳米管的单向碳纤维-聚合物杂化复合材料的热力学研究
- 作者：Hassanzadeh-Aghdam M. K.;Ansari R.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Hybrid composites;
- Carbon nanotube;
- Thermoelastic response;
- Micromechanics;
- Random dispersion;
48.Fracture mechanics analysis of an anti-plane crack in gradient elastic sandwich composite structures

机译：梯度弹性夹芯复合结构中反平面裂纹的断裂力学分析
- 作者：Li Jine;Wang Baolin
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Strain gradient elasticity;
- Layered structure;
- Anti-plane fracture;
- Crack tip field;
- Collinear crack;
49.Overall thermal conductivity of unidirectional hybrid polymer nanocomposites containing SiO_2 nanoparticles

机译：含SiO_2纳米粒子的单向杂化聚合物纳米复合材料的整体导热系数
- 作者：Mahmoodi M. J.;Hassanzadeh-Aghdam M. K.;Ansari R.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Hybrid nanocomposite;
- Thermal conductive properties;
- Micromechanics;
- Interfacial thermal resistance;
50.Thermo-protective properties of polymer composites with nano-titanium dioxide

机译：纳米二氧化钛对聚合物复合材料的热防护性能
- 作者：Stawarz Sylwester;Witek Natalia;Kucharczyk Wojciech;Bakar Mohamed;Stawarz Magdalena
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Epoxy nanocomposites;
- Ablative properties;
- Thermal resistance;
51.Electromechanical analytical model of shape memory alloy based tunable cantilevered piezoelectric energy harvester

机译：基于形状记忆合金的可调悬臂压电能量采集器的机电分析模型
- 作者：Senthilkumar M.;Vasundhara M. G.;Kalavathi G. K.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Cantilever beam;
- Energy harvester;
- Piezoelectric;
- Shape memory alloy;
52.A refined sin hyperbolic shear deformation theory for sandwich FG plates by enhanced meshfree with new correlation function

机译：带有新关联函数的增强型无网格细化夹层FG板的精细双曲剪切变形理论
- 作者：Vu Tan-Van;Curiel-Sosa Jose L.;Tinh Quoc Bui
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
53.Novel method for analyzing the behavior of composite beams with non-smooth interfaces

机译：分析非光滑界面组合梁性能的新方法
- 作者：Liu Chein-Shan;Li Botong;Kuo Chung-Lun
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第4期
- Composite beams;
- Moderate weak-form formulation;
- Forced vibration;
- Non-smooth interface;
54.Stability analysis of a capacitive micro-resonator with embedded pre-strained SMA wires

机译：嵌入式预应变SMA导线的电容式微谐振器的稳定性分析
- 作者：Fathalilou Moahmmad;Rezazadeh Ghader;Mohammadian Aynaz
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第4期
- MEMS;
- SMA;
- Electrostatic;
- Resonator;
- Stability;
55.Micromechanical modeling of particulate-filled composites using micro-CT to create representative volume elements

机译：使用Micro-CT创建颗粒填充复合材料的微机械模型，以创建具有代表性的体积元素
- 作者：Guven Ibrahim;Cinar Kenan
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第4期
56.A parametric study on thermo-mechanical vibration of axially functionally graded material pipe conveying fluid

机译：轴向功能梯度物料输送流体热机械振动的参数研究
- 作者：Dai Jiayin;Liu Yongshou;Liu Huichao;Miao Changxu;Tong Guojun
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第4期
- DQM;
- Functionally graded material;
- Pipe conveying fluid;
- Stability;
- Volume fraction function;
57.Investigation of interfacial thermal resistance of hybrid graphene/hexagonal boron nitride

机译：杂化石墨烯/六方氮化硼的界面热阻研究
- 作者：Senturk Ahmet Emin;Oktem Ahmet Sinan;Konukman Alp Er S.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第4期
- Hybrid graphene;
- hexagonal boron-nitride;
- Molecular dynamics;
- Interfacial thermal resistance;
- Vacancy defect;
- Stone-Wales defect;
58.Benchmark analysis of piezoelectric bimorph energy harvesters composed of laminated composite beam substrates

机译：层压复合梁基板组成的压电双压电晶片能量收集器的基准分析
- 作者：Jha B. K.;Ray M. C.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第4期
- Energy harvester;
- Smart materials;
- Smart structures;
- Exact solutions;
- Bimorph;
59.Intelligent tribological surfaces: from concept to realization using additive manufacturing

机译：智能摩擦表面：从概念到使用增材制造的实现
- 作者：Murashima Motoyuki;Yoshino Shouta;Kawaguchi Masato;Umehara Noritsugu
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第4期
- Intelligent surface;
- Multifunctionality;
- Morphing;
- Additive manufacturing;
- Functionalized surfaces;
60.Dispersion of Love waves in size-dependent substrate containing finite piezoelectric and viscoelastic layers

机译：Love波在包含有限压电层和粘弹性层的尺寸相关基底中的色散
- 作者：Goyal Richa;Kumar Satish
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第4期
- Love wave;
- Piezoelectricity;
- Viscoelastic;
- Micropolar;
- Heterogeneity;
- Characteristic length;
- Dispersion relations;
61.Geometrically nonlinear bending of functionally graded nanocomposite trapezoidal plates reinforced with graphene platelets (GPLs)

机译：石墨烯薄片（GPL）增强的功能梯度纳米复合梯形板的几何非线性弯曲
- 作者：Zhao Zhan;Feng Chuang;Dong Youheng;Wang Yu;Yang Jie
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第4期
- Nonlinear bending;
- Trapezoidal plate;
- Functionally graded nanocomposite;
- Graphene platelets;
- Thermo-mechanical loading;
62.Post-buckling optimization of two-dimensional functionally graded porous beams

机译：二维功能梯度多孔梁的屈曲后优化
- 作者：Jamshidi Mohammadamin;Arghavani Jamal;Maboudi Ghazaleh
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第4期
- Functionally graded porous;
- Post-buckling;
- Multi-objective optimization;
- Taguchi method;
63.Semi-active control of ambulance stretcher system based on parallel mechanism with MR dampers and perturbation analysis

机译：基于MR阻尼器并联机构和扰动分析的救护车担架系统半主动控制
- 作者：Gao Xiang;Niu Junchuan;Liu Zhihui;Tian Jinxin
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第4期
- Ambulance stretcher;
- Parallel mechanism;
- Perturbation analysis;
- Robustness;
- Semi-active control;
- Vibration isolation;
64.Influence of interfacial bonding conditions on the anti-penetration performance of ceramic/metal composite targets

机译：界面结合条件对陶瓷/金属复合靶材抗侵彻性能的影响
- 作者：Yao Ruixia;Su Fei;Mao Ronghai
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第4期
- Ceramic;
- metal composite;
- Ballistic impact;
- Damage;
- Bonding conditions;
- Finite element;
- Smoothed particle hydrodynamics;
65.Mode localization phenomenon of functionally graded nanobeams due to surface integrity

机译：由于表面完整性，模式定位现象是功能分级纳米束的
- 作者：Shaat Mohamed
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Vibration;
- Mode localization;
- Zero-frequency mode;
- Roughness;
- Nanobeams;
66.Electro-viscoelastic performance of a tubular dielectric elastomer actuator

机译：管状介电弹性体致动器的电粘弹性性能
- 作者：He Tianhu;Wang Zhengang
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Soft active material;
- Dielectric elastomer membrane;
- Viscoelasticity;
- Electromechanical performance;
- Instability;
67.A comparison of rubber stress relaxation models for conveyor belt indentation rolling resistance calculations

机译：输送带压痕滚动阻力计算橡胶应力松弛模型的比较
- 作者：Munzenberger Paul J.;OShea Jayne I.;Wheeler Craig A.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Belt conveying;
- Indentation rolling resistance;
- Stress relaxation;
68.Thermomechanical nonlinear in-plane analysis of fix-ended FGM shallow arches on nonlinear elastic foundation using two-step perturbation technique

机译：使用两步扰动技术在非线性弹性基础上的固定FGM浅拱门热机械非线性接管
- 作者：Babaei H.;Kiani Y.;Eslami M. R.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
69.Vibroacoustic analysis of thermo-elastic laminated composite sandwich curved panel: a higher-order FEM- BEM approach

机译：热弹性层压复合材料夹层曲线板的纵传分析：一种高阶的近期方法
- 作者：Sharma Nitin;Mahapatra Trupti Ranjan;Panda Subrata Kumar
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Composite sandwich curved panel;
- Thermal environment;
- HSDT;
- FEM-BEM;
- Acoustic radiation;
- MATLAB computer code;
70.Nonlinear performance analysis of forced carbon nanotube- based bio-mass sensors

机译：强制碳纳米管的生物质量传感器非线性性能分析
- 作者：Ali-Akbari H. R.;Ceballes S.;Abdelkefi A.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Carbon nanotubes;
- Nonlinear vibrations;
- Bio-mass sensing;
- Eringen's nonlocal elasticity;
- Method of Multiple Scales;
71.Robust topology optimization formulation including local failure and load uncertainty using sequential quadratic programming

机译：强大的拓扑优化配方，包括使用顺序二次编程的局部故障和负载不确定性
- 作者：Long Kai;Wang Xuan;Du Yixian
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Topology optimization;
- Reciprocal SIMP method;
- Sequential quadratic programming;
- Load uncertainty;
- Fail-safe design;
72.Vibration analysis of circular cylindrical shells made of metal foams under various boundary conditions

机译：各种边界条件下金属泡沫制成的圆柱形壳的振动分析
- 作者：Wang Yan Qing;Ye Chao;Zu Jean W.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Metal foam;
- Circular cylindrical shell;
- Free vibration;
- Love's shell theory;
- Rayleigh-Ritz method;
73.Spectral element method for vibration analysis of three- dimensional pipes conveying fluid

机译：传送液三维管振动分析的光谱元件方法
- 作者：Zhu Hong-zhen;Wang Wei-bo;Yin Xue-wen;Gao Cun-fa
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Spectral element method;
- Vibration;
- Three-dimensional pipe;
- Fluid;
74.Investigating the cold spraying process with the material point method

机译：用材料点法研究冷喷涂过程
- 作者：Liu Yan;Xu Chenyang
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Cold spray;
- High-velocity impact;
- Metal jetting;
- Mechanical interlocking;
- Meshfree particle methods;
- Material point method;
75.Crack interaction study in piezoelectric materials under thermo-electro-mechanical loading environment

机译：热电机加载环境下压电材料裂纹相互作用研究
- 作者：Mishra Ranjan;Burela Ramesh Gupta;Pathak Himanshu
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Crack interaction;
- Piezoelectric;
- Thermo-electro-mechanical loading;
- SIFs;
- XFEM;
76.An enhanced square-grid structure for additive manufacturing and improved auxetic responses

机译：增强的方形栅结构，适用于添加剂制造和改进的辅助反应
- 作者：Meena K.;Calius E. P.;Singamneni S.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第2期
- Auxetic structures;
- Additive manufacturing;
- Finite element;
- Negative Poisson's ratios;
77.Effect of flexoelectricity on the electromechanical response of graphene nanocomposite beam

机译：挠性电性对石墨烯纳米复合梁机电响应的影响
- 作者：Kundalwal S. I.;Shingare K. B.;Rathi Ankit
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Graphene;
- Flexoelectricity;
- Piezoelectricity;
- Nanocomposite;
- Micromechanics;
- Finite element;
78.Size-dependent nonlinear vibration of an electrostatic nanobeam actuator considering surface effects and inter-molecular interactions

机译：考虑表面效应和分子间相互作用的静电纳米致动器的尺寸依赖性非线性振动
- 作者：Esfahani Saman;Khadem Siamak Esmaeilzade;Mamaghani Ali Ebrahimi
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
79.Dynamic reliability analysis model for structure with both random and interval uncertainties

机译：随机间隔不确定性的结构动态可靠性分析模型
- 作者：Shi Yan;Lu Zhenzhou
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Dynamic reliability analysis;
- Hybrid input variables;
- Non-probabilistic reliability index;
- Kriging surrogate;
80.A distributed parametric model of Brinson shape memory alloy based resonant frequency tunable cantilevered PZT energy harvester

机译：布林森形状记忆合金基于谐振频率可调悬臂的分布式参数模型PZT能量收割机
- 作者：Vasundhara M. G.;Senthilkumar M.;Kalavathi G. K.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Tunable;
- Shape memory alloy;
- Energy harvester;
- PZT;
- Cantilever;
81.A size-dependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation

机译：尺寸依赖性精确理论，用于热屈曲，温度依赖性FG多层GPLRC复合纳米结构限制弹性基础的振动振动分析
- 作者：Safarpour Hamed;Hajilak Zanyar Esmailpoor;Habibi Mostafa
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
82.Bayesian inference in validation of global MPP for the reliability analysis of composite structures

机译：贝叶斯推断在全球MPP验证中，复合结构可靠性分析
- 作者：Hoffbauer Luisa N.;Antonio Carlos C.
- 期刊名称：《International journal of mechanics and materials in design》 | 2019年第3期
- Uncertainty;
- Reliability;
- Composite structures;
- Inverse optimization;
- Bayesian estimation;
- Sensitivity;
83.Transient response of porous inhomogeneous nanobeams due to various impulsive loads based on nonlocal strain gradient elasticity

机译：基于非局部应变梯度弹性的各种脉冲负荷导致多孔非均匀纳米射末的瞬态响应
- 作者：Mirjavadi Seyed Sajad;Afshari Behzad Mohasel;Barati Mohammad Reza;Hamouda A. M. S.
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
- Transient vibration;
- Porous FG;
- Nano-size beam;
- Non-local strain gradient theory;
- Impulsive load;
84.Message from the Editor-in-Chief

机译：来自主编的消息
- 作者：Meguid Shaker A.
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
85.Exact solutions to magneto-electro-thermo-elastic fields for a cracked cylinder composite during thermal shock

机译：热冲击过程中裂解圆筒复合材料的磁电热 - 热弹性的精确解决方案
- 作者：Chang Dong-Mei;Liu Xue-Feng;Wang Bao-Lin;Liu Li;Wang Tie-Gang;Wang Quan;Han Jian-Xin
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
- Thermal shock;
- Magneto-electro-thermo-elastic composite;
- Crack;
- Finite cylinder;
- Exact solution;
86.Nonlinear analysis of flexoelectric energy harvesters under force excitations

机译：强制激励下柔性电能收割机的非线性分析
- 作者：Dai H. L.;Yan Z.;Wang L.
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
- Flexoelectricity;
- Energy harvester;
- Nonlinear effects;
- Size-dependency;
- Nanoscale;
87.An arbitrary multi-node extended multiscale finite element method for thermoelastic problems with polygonal microstructures

机译：具有多边形微结构的热弹性问题的任意多节点扩展多尺度有限元方法
- 作者：Zheng Yonggang;Zhang Hanbo;Lv Jun;Zhang Hongwu
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
88.Mechanics and FEM estimation of gaps generated in star-ring active contacts of ORBIT motor during operation

机译：在运行过程中轨道电机星形主动触点中产生的隙的力学和有限元估计
- 作者：Roy Debanshu;Maiti Rathindranath;Das Prasanta Kumar
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
- Epitrochoid star;
- ORBIT motor;
- Active and transition contacts;
- Deformations and gaps;
- Load sharing;
- FEM;
89.Nonlinear stability analysis of FGM shallow arches under an arbitrary concentrated radial force

机译：基于任意浓缩径向力下FGM浅拱的非线性稳定性分析
- 作者：Kiss L. P.
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
- Shallow arch;
- Functionally graded material;
- Nonlinear;
- Stability;
- Bifurcation buckling;
- Limit-point buckling;
90.Modeling of superelastic behavior of porous shape memory alloys

机译：多孔形状记忆合金超弹性行为的建模
- 作者：Abdollahzadeh Masumeh;Hoseini Seyed Flamed;Faroughi Shirko
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
- Porous shape memory alloy;
- Homogenization;
- Finite element method;
- Bernoulli process;
91.Hybrid IG-FE method applied to cohesive fracture/contact in particle-filled elastomeric composites

机译：杂交Ig-Fe方法应用于颗粒填充弹性体复合材料中的内聚骨折/接触
- 作者：Jebeli Saeed Maleki;Mashhadi Mahmoud Musavi;Baghani Mostafa
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
- Fiber-matrix contact;
- debonding;
- Hybrid IG-FE discretization;
- Knot insertion;
- Isogeometric analysis;
92.An influence of impact energy on magnesium alloy behaviour

机译：影响能量对镁合金行为的影响
- 作者：Szymczak Tadeusz;Makowska Katarzyna;Kowalewski Zbigniew L.;Lasota Piotr
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
- Magnesium alloy;
- Impact;
- Projectile;
- Perforation;
- Fractography;
- Microstructure;
93.Modelling and characterization of mechanical properties of optimized honeycomb structure

机译：优化蜂窝结构力学性能的建模与表征
- 作者：Zhang L.;Liu B.;Gu Y.;Xu X. H.
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
- Honeycomb structure;
- Cell joint thickened;
- Mechanical properties optimization;
94.Modelling of the mechanical response of Zr-Nb and Ti-Nb alloys in a wide temperature range

机译：Zr-Nb和Ti-Nb合金在宽温度范围内的建模
- 作者：Skripnyak Vladimir A.;Skripnyak Vladimir V.;Skripnyak Evgeniya G.;Skripnyak Nataliya V
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
95.Structural shape optimization with meshless method and swarm-intelligence based optimization

机译：基于无网格方法的结构形状优化和基于群智能的优化
- 作者：Daxini S. D.;Prajapati J. M.
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
96.Reliability assessment of display delamination considering adhesive properties based on statistical model calibration and validation

机译：基于统计模型校准和验证的粘合性能考虑粘合性能的可靠性评估
- 作者：Nah Jung Suk;Lee Jongsoo
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
97.High temperature electromechanical response of multilayer piezoelectric laminates under AC electric fields for fuel injector applications

机译：用于燃料喷射器应用的AC电场下多层压电层压板的高温机电响应
- 作者：Narita Fumio;Hasegawa Ryohei;Shindo Yasuhide
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第1期
- Mesomechanics;
- Finite element analysis;
- Material testing;
- Piezoelectric laminates;
- Depolarization;
- High temperature;
- Fuel injectors;
98.Geometrically nonlinear analysis of FGM shells using solid- shell element with parabolic shear strain distribution

机译：具有抛物线剪切应变分布的固体壳元件的FGM壳几何非线性分析
- 作者：Hajlaoui A.;Chebbi E.;Wali M.;Dammak F.
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第2期
- Solid-shell element;
- Functionally graded material;
- Geometric nonlinearities;
- Modified FSDT;
99.Uncertain vibration analysis based on the conceptions of differential and integral of interval process

机译：基于区间流程概念的不确定振动分析
- 作者：Li Jinwu;Jiang Chao;Ni Bingyu;Zhan Lina
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第2期
100.Nonlinear vibration of FGM moderately thick toroidal shell segment within the framework of Reddy's third order-shear deformation shell theory

机译：FGM适度厚环形壳体框架内的非线性振动在Reddy第三阶剪切变形壳理论框架内
- 作者：Pham Minh Vuong;Nguyen Dinh Duc
- 期刊名称：《International journal of mechanics and materials in design》 | 2020年第2期

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号