...
首页> 外文期刊>International journal of mechanics and materials in design >On the nonlinear dynamics of a piezoelectrically tuned micro-resonator based on non-classical elasticity theories
【24h】

On the nonlinear dynamics of a piezoelectrically tuned micro-resonator based on non-classical elasticity theories

机译:基于非经典弹性理论的压电调谐微谐振器的非线性动力学

获取原文
获取原文并翻译 | 示例

摘要

Size dependent static and dynamic behavior of a fully clamped micro beam under electrostatic and piezoelectric actuations is investigated. The microbeam is modeled under the assumptions of Euler-Bernoulli beam theory. Viscous damping and nonlinearities due to electrostatic actuation and mid-plane stretching are considered. Residual stress and fringing field effect are taken into account as well. Governing equation of motion is derived using Hamilton's principle along with the strain gradient theory (SGT), which is a non-classical continuum theory capable of taking size effect of elastic materials into account. Reduced order model of the partial differential equations of the system is obtained using Galerkin method. Static deflection, pull-in voltage and the primary resonance of the microbeam are examined and the effect of piezoelectric voltage and its polarization on the size dependent static and dynamic response is studied. It is found that the piezoelectric voltage can effectively change the flexural rigidity of the system which in turn affects the pull-in instability regime. The effect of material length scale parameter is examined by comparing the results of the SGT with the modified couple stress (MCST) and classical theory (CT), both of which are special cases of the former. Comparison demonstrates that the CT underestimates the stiffness and consequently the pull-in voltage and overestimates the amplitude of periodic solutions. The difference between the results of classical and non-classical theories becomes more and more as the dimensions of the system gets close to the length scale parameter. Non-classical theories predict more realistic behaviors for the micro system. The results of this paper can be used in designing microbeam based MEMS devices.
机译:研究了在静电和压电作用下完全夹持的微束的尺寸相关的静态和动态行为。在Euler-Bernoulli束理论的假设下对微束建模。考虑了由于静电作用和中平面拉伸引起的粘性阻尼和非线性。还考虑了残余应力和边缘场效应。使用汉密尔顿原理和应变梯度理论(SGT)导出运动的控制方程,应变梯度理论是一种能够考虑弹性材料尺寸效应的非经典连续体理论。利用Galerkin方法获得了系统偏微分方程的降阶模型。研究了微梁的静态挠度,引入电压和初级共振,研究了压电电压及其极化对尺寸相关的静态和动态响应的影响。发现压电电压可以有效地改变系统的抗弯刚度,这反过来又会影响吸合不稳定性状态。通过将SGT的结果与改进的耦合应力(MCST)和经典理论(CT)进行比较,来检验材料长度尺度参数的影响,二者都是前者的特例。比较表明,CT低估了刚度,因此低估了引入电压,高估了周期解的幅度。随着系统尺寸接近长度尺度参数,古典理论和非古典理论的结果之间的差异变得越来越大。非古典理论预测了微系统的更现实的行为。本文的结果可用于设计基于微束的MEMS器件。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号