...
首页> 外文期刊>International journal of impact engineering >Determination of the wave propagation coefficient of viscoelastic SHPB: Significance for characterization of cellular materials
【24h】

Determination of the wave propagation coefficient of viscoelastic SHPB: Significance for characterization of cellular materials

机译:粘弹性SHPB的波传播系数的确定:表征细胞材料的意义

获取原文
获取原文并翻译 | 示例
           

摘要

Test bars made of viscoelastic materials are frequently employed for the testing of soft materials, using split Hopkinson pressure bar (SHPB) techniques, because of their low mechanical impedance. Determination of the propagation coefficient for such bars is a critical step for the subsequent evaluation of the material properties of the specimen. This propagation coefficient may be determined through experiments or using the analytical solutions if the material properties of the bars are known in advance. Contrary to the case of elastic materials, it is difficult to provide generic properties for such materials as these are dependent on the loading rate, environmental history and manufacturing conditions. Many studies may be found in the open literature reporting numerical values of the identified parameters for various viscoelastic materials evaluated through the wave propagation experiments. However, the observed scatter among such data in the case of individual materials dictates that the published parameters should be used with caution. Two polymethyl methacrylate (PMMA) bars, used as incident and transmitter bar in an SHPB test setup, are being subjected to the wave propagation testing. Longitudinal strains, generated as a result of axial impact of strikers with two different lengths and recorded at the mid-length of the bars, are used to determine the wave propagation coefficient. Propagation coefficients are also evaluated using selected material models of PMMA published in the literature. A considerable scatter is found in the evaluated frequency dependent propagation coefficient. The consequence of using such scattered properties for the bars on the results of the stress-strain response of aluminum foam is being investigated. Although, the evaluated dynamic properties of the tested foam are not considerably influenced in quantitative terms, however qualitative differences are observed.
机译:由粘弹性材料制成的测试棒由于其低机械阻抗而经常使用分裂霍普金森压力棒(SHPB)技术来测试软材料。确定此类钢筋的传播系数是随后评估样品材料性能的关键步骤。如果棒的材料特性是事先已知的,则可以通过实验或使用分析溶液来确定该传播系数。与弹性材料的情况相反,难以为此类材料提供通用属性,因为这些属性取决于加载速率,环境历史和制造条件。在公开的文献中可以找到许多研究报告,这些研究报告了通过波传播实验评估的各种粘弹性材料的已确定参数的数值。但是,在个别材料的情况下,观察到的此类数据之间的分散性表明应谨慎使用已发布的参数。在SHPB测试设置中用作入射和发射器的两条聚甲基丙烯酸甲酯(PMMA)棒正在接受波传播测试。纵向应变是由具有两种不同长度的撞针的轴向冲击产生的,并记录在钢筋的中部长度处,用于确定波传播系数。还使用文献中公布的选定的PMMA材料模型来评估传播系数。在评估的频率相关传播系数中发现相当大的分散。正在研究对条使用这种分散特性对泡沫铝的应力-应变响应结果的影响。尽管从数量上来讲,评估的测试泡沫的动态性能没有受到很大的影响,但是观察到了质量上的差异。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号