Electroplated Ni-Fe_2O_3 composite coating for solid oxide fuel cell interconnect application

摘要

Ni-Fe_2O_3 composite coating was applied onto ferritic stainless steel using the cost-effective method of electroplating for intermediate temperature solid oxide fuel cell (SOFC) interconnects application. By comparison, the coated and bare steels were evaluated at 800 °C in air corresponding to the cathode environment of SOFC. The oxidation investigations indicated that the oxidation rate of the coated steel was close to that of the bare steel after initially rapid mass gain. The mass gain of the coated steel was higher than that of the bare steel owing to the formation of double-layer oxide structure with an outer layer of (Ni,Fe_3O_4/NiO atop an inner layer of Cr_2O_3. The area specific resistance (ASR) of the double-layer oxide scale was lower than that of the Cr_2O_3 scale thermally grown on the bare steel.