首页> 外文期刊>International Journal of Heat and Mass Transfer >The effect of tube diameter on vertical two-phase flow regimes in small tubes
【24h】

The effect of tube diameter on vertical two-phase flow regimes in small tubes

机译:管径对小管垂直两相流态的影响

获取原文
获取原文并翻译 | 示例
       

摘要

Flow boiling flow patterns in four circular tubes with internal diameters of 1.10, 2.01, 2.88 and 4.26 mm were investigated in the present project. The experiments were conducted in vertical upward two-phase flow using R134a as the working fluid. The observed flow patterns include dispersed bubble, bubbly, confined bubble, slug, churn, annular and mist flow. The flow characteristics in the 2.88 and 4.26 mm tubes are similar to those typically described in normal size tubes. The smaller diameter tubes, 1.10 and 2.01 mm, exhibit strong "small tube characteristics" as described in earlier studies. The sketched flow maps show that the transition boundaries of slug-churn and churn-annular depend strongly on diameter. On the contrary, the dispersed bubble to churn and bubbly to slug boundaries are less affected. The transition boundaries are compared with existing models for normal size tubes showing poor agreement.
机译:在本项目中研究了四个内径分别为1.10、2.01、2.88和4.26 mm的圆管中的沸腾流型。实验是使用R134a作为工作流体在垂直向上的两相流中进行的。观察到的流动模式包括分散的气泡,气泡,密闭的气泡,团块,搅动,环形和薄雾流。 2.88和4.26毫米管中的流动特性与正常尺寸管中通常描述的相似。如先前研究中所述,直径较小的管(1.10和2.01 mm)具有很强的“小管特性”。绘制的流程图表明,弹头搅动和环形搅动的过渡边界在很大程度上取决于直径。相反,分散的气泡搅动和气泡到块状边界受到的影响较小。将过渡边界与显示标准差的常规尺寸管的现有模型进行比较。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号