首页> 外文期刊>International Journal of Heat and Fluid Flow >Turbulent wake behind two intersecting flat plates
【24h】

Turbulent wake behind two intersecting flat plates

机译:两个相交平板后面的湍流尾流

获取原文
获取原文并翻译 | 示例
       

摘要

We have considered the three-dimensional wake behind a cross formed by two intersecting flat plates using direct numerical simulations. The Reynolds number based on the uniform inflow velocity U-0 and the plate width d was 1000. The vortex shedding in the wake was totally suppressed in a 4d wide intersection region and this gave rise to a massive zone of recirculating flow. Quasi two-dimensional vortex shedding with a primary frequency 0.165 U-0/d occurred behind the outer branches more than 7d from the intersection. The wake behind the outer branches of the crossing plates closely resembled the wake behind a single flat plate. However, the wake flow in an intermediate region (located between the intersection region and the outer branches) was affected by persistent secondary flows. Further, shear-layer (K-H)instabilities have been observed in this region. The mean wake structure revealed the formation of four symmetrically positioned pairs of swirling vortices close to the intersection corner next to the plate's edges. (C) 2016 Elsevier Inc. All rights reserved.
机译:我们已经使用直接数值模拟考虑了由两个相交的平板形成的十字形后面的三维尾流。基于均匀的流入速度U-0和板宽d的雷诺数为1000。在4d宽的相交区域中完全抑制了尾流中的涡流脱落,从而产生了大量的回流区域。距离交叉点超过7d的外部分支后面发生了一次频率为0.165 U-0 / d的准二维涡旋脱落。交叉板外部分支后面的尾流与单个平板后面的尾流非常相似。但是,中间区域(位于交叉区域和外部分支之间)的尾流受到持久性次要流的影响。此外,已在该区域观察到剪切层(K-H)不稳定性。平均尾流结构揭示了在靠近板边缘的相交角附近形成了四个对称定位的旋涡对。 (C)2016 Elsevier Inc.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号