Assessment of creep-fatigue behavior, deformation mechanisms, and microstructural evolution of alloy 709 under accelerated conditions

摘要

Alloy 709 is a leading candidate structural material for sodium-cooled fast spectrum reactors (FSR), where creepfatigue is a potential failure mode. Low cycle fatigue (LCF) and creep-fatigue tests with 30 min tensile hold times have been conducted to failure at 550 and 650 degrees C, corresponding to potential service and accelerated test temperatures, respectively. Creep-fatigue life is reduced relative to LCF at both temperatures, though significantly more at 550 degrees C compared to 650 degrees C. Differences in slip behavior, dynamic recovery, precipitate evolution, and strain-aging effects result in less stress relaxation and sustained high tensile stresses in creep-fatigue at 550 degrees C; thus, there is more intergranular damage compared to 650 degrees C.