EVALUATION AND OPTIMIZATION OF THE OXIDATION EFFICIENCY OF A UV-PERSULPHATE-OXIDATION TOC-ANALYZER FOR THE DETERMINATION OF OIL CONTAMINATION FROM FORESTRY IN GROUND WATER

摘要

Different chain oils (tall, rape seed and mineral oils) have been used as model compounds to evaluate and optimize the applicability of UV-persulphate TOC-analyzer for quantitative determination of forestry oils and to follow the progress of their biodegradability. It was shown, that K_2S_2O_8-UV-oxidation method is not sufficient to oxidize chain oils completely. There were differences in oxidation efficiency between different oils, changing from about 46% measured for tall oil to about 25% observed for rape seed chain oil. The addition of Triton X-100 surfactant up to 2% (w/w) was observed to increase the oxidation efficiency, e.g. to 75% for tall oil. The observations can be explained by assuming that in the presence of surfactant the emulsions are more homogeneous and stable. Optimization using two-level full factorial design (temperature of the oxidation chamber and the amount of persulphate) was studied. The results show that the UV-persul-phate-oxidation TOC-analyzer is not suitable method to monitor biodegradability of chain oils.