...
首页> 外文期刊>IEEE Transactions on Intelligent Transportation Systems >A Hybrid Submicroscopic-Microscopic Traffic Flow Simulation Framework
【24h】

A Hybrid Submicroscopic-Microscopic Traffic Flow Simulation Framework

机译:一个混合亚型微型微观交通流量仿真框架

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Current lane-based microscopic traffic simulators combine car-following and lane changing logic to describe the (often discrete) lateral vehicle motion on multi-lane road segments. However, the simulated lateral trajectories are physically unplausible and inside-lane behavior such as lane-keeping and curve negotiation cannot be modelled. In this work, we integrate lateral vehicle dynamics and yaw motion into a traffic simulation framework, aiming to describe lateral motion and vehicle interactions with more precision. The resulting framework consists of two coupled layers, an upper tactical level that plans maneuvers such as lane-changing; and a lower operational layer with a control module (steering and acceleration control) that operates in a closed loop with the bicycle model of vehicle dynamics. The feedback mechanism between the layers allows for dynamic trajectory re-planning. Unlike the microscopic traffic models, the proposed framework accounts for lateral vehicle dynamics and yaw motion; provides additional variables such as vehicle heading and front wheel steering angle; and is hence termed as submicroscopic. Case study results demonstrate the power of the framework to include lateral maneuvers such as curve negotiation, corrective steering, lane change abortion and fragmented lane changing. The framework was operationalized to model multi-lane traffic flow consisting of human-driven vehicles. At the macroscopic level, the traffic flow simulation can reproduce phenomena such as capacity drop. Thus the framework preserves the properties of the component models and at the same time describe the continuous 2-D planar movement of vehicles.
机译:基于目前的基于车道的微观流量模拟器结合了汽车跟踪和车道更换逻辑,描述了多车道道路段上的(通常是离散的)横向车辆运动。然而,模拟的横向轨迹是物理上不可行的,内外车道行为,例如车道保持和曲线协商。在这项工作中,我们将横向车辆动态和偏航运动整合到交通仿真框架中,旨在描述横向运动和车辆交互,更精确。由此产生的框架由两个连接层组成,一个较高的战术水平,计划车道如车道变化;和一个下较低的操作层,其具有控制模块(转向和加速度控制),其在具有车辆动态的自行车模型的闭环中操作。层之间的反馈机制允许动态轨迹重新计划。与显微流量模型不同,所提出的框架占横向车辆动力学和偏航运动的账户;提供额外的变量,如车辆标题和前轮转向角;因此被称为亚微血症。案例研究结果表明框架的力量包括横向演动,例如曲线谈判,纠正转向,车道变化流产和碎片车道变化。该框架是运作的,以模拟由人机车辆组成的多通道交通流量。在宏观层面,交通流量模拟可以再现现象,例如容量下降。因此,该框架保留了部件模型的性质,同时描述了车辆的连续2-D平面运动。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号