Obtaining Time Derivative of Low-Frequency Signals With Improved Signal-to-Noise Ratio

摘要

Accurate prediction of heat flux is desired in many transient aerospace and heat treatment applications, but it is challenging since the heat flux-temperature integral relationship implicitly requires the time derivative of experimentally obtained temperature data. The temperature data collected in practical environments invariably contain noise from various sources. Predicting heat flux from transient temperature data is well known to be ill posed. High-frequency noise in the temperature data causes unbounded numerical derivatives with increasing sampling rate. However, it has theoretically been demonstrated that a stable and accurate heat flux can be predicted using the time derivative of temperature (dT/dt) even in the presence of significant white noise. This motivates this paper in developing a voltage-rate sensor interface for low-frequency applications in solid heat-conducting bodies. The present concept is to amplitude modulate the voltage data and then differentiate them at a higher frequency. The voltage-rate interface, which is used in conjunction with an existing in situ temperature sensor, can deliver real-time heating rate with improved SNR, which is verified by both simulation (Matlab and PSpice) and experiments. The SNR is also shown to improve with increasing sampling rate, which is an advantage of this interface.