An Efficient Piezoelectric Energy Harvesting Circuit With Series-SSHI Rectifier and FNOV-MPPT Control Technique

摘要

This article presents an efficient piezoelectric (PE) energy harvesting (EH) circuit based on the techniques of series synchronized switch harvesting on inductor (Series-SSHI) and maximum power point tracking (MPPT). The MPPT is achieved using the proposed fractional normal-operation voltage (FNOV) method, which is based on the Series-SSHI operating principle. The FNOV method no longer disconnects the PE harvester from the load circuit to measure its open-circuit (OC) voltage. Instead, it measures the peak PE voltage during the normal Series-SSHI operation to enable the continuous EH process. The FNOV-MPPT circuit is implemented based on a variable width hysteresis controller for saving energy. In addition, the prototyped circuit can achieve the figure of merit factor of 2.68 and the maximum MPPT efficiency of 98.1% with the PE OC voltage ranging from 2 to 5 V. The measurements confirm the validity of the proposed FNOV-MPPT solution for the weakly coupled PE harvesters.