首页> 外文期刊>電子情報通信学会技術研究報告 >再帰型・非再帰型構造からなる未知系の同定に関する検討
【24h】

再帰型・非再帰型構造からなる未知系の同定に関する検討

机译:具有递归/非递归结构的未知系统的识别研究

获取原文
获取原文并翻译 | 示例
       

摘要

一般的に共振系を推定する場合,動作の安定性からFIRフィルタが用いられる.しかし,非常に多くのタップ数を必要とするため,多大な計算量を要する.そこで,本論文ではFIRフィルタに安定性を考慮したIIRフィルタが直列接続された構造を共振系を模擬する構造として同定する手法を提案する.適応フィルタには,FIRフィルタに巡回型フィルタまたは再帰型ラティスフィルタが直列接続された構造の2種類を用いて性帝比較を行う.さらに,再帰型ラティスフィルタの係数感度が低いため,未知系が高次になっても安定に動作すると考えられる.%A FIR filter generally is used from the stability of the movement,when resonated system is estimated. But, the great amount of calculation is needed. Because very many taps are necessary for the FIR filter. So, The technique to identify the unknown system which imitated system resonated is proposed by this thesis. This unknown system is the structure that non-recursive type is connected to recursive type in series. Two kinds of the adaptation digital niters are used, when it identify unknown system. One is the structure that IIR filter is connected to FIR filter and the other is the structure that recursive lattice filter is connected to FIR filter. Then, performance compares both the adaptation digital filters. Even if unknown system becomes the high degree, it can think that it works in the stability. Because the coefficient sensitivity of recursive lattice filter is poor.
机译:通常,在估计谐振系统时,由于其工作稳定性而使用FIR滤波器。但是,它需要大量的抽头,这需要大量的计算。因此,在本文中,我们提出一种用于识别结构的方法,其中将考虑稳定性的IIR滤波器串联到FIR滤波器作为模拟谐振系统的结构。对于自适应滤波器,使用两种类型的结构执行性别比较,其中将循环滤波器或递归晶格滤波器串联连接到FIR滤波器。此外,由于递归晶格滤波器的系数灵敏度低,因此即使阶数较高,也可以认为未知系统稳定地工作。 %FIR滤波器通常是从机芯的稳定性出发,在估计共振系统时使用,但是需要大量的计算,因为FIR滤波器需要很多抽头。本文提出了一种模拟系统谐振的系统。该未知系统是非递归类型与递归类型串联连接的结构。当识别未知系统时,使用两种自适应数字尼特。一种是这种结构。 IIR滤波器与FIR滤波器相连,另一个是递归点阵滤波器与FIR滤波器相连的结构,然后将两个自适应数字滤波器的性能进行比较,即使未知系统变得高度,它也可以认为它可以在FIR滤波器中工作。因为递归点阵滤波器的系数敏感性很差。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号