...
首页> 外文期刊>IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control >Pre-focused lead titanate >25 MHz single-element transducers from hollow spheres
【24h】

Pre-focused lead titanate >25 MHz single-element transducers from hollow spheres

机译:来自中空球的预聚焦钛酸铅> 25 MHz单元件换能器

获取原文
获取原文并翻译 | 示例

摘要

Miniature lead titanate (PT) hollow spheres with diameters in the 1 to 10 mm range and wall thicknesses of 20 to 120 /spl mu/m have been fabricated. Shell sections were used as components of pre-focused transducers. Spheres are produced using a new sacrificial core technique that produces hundreds of spheres with a more uniform wall thickness than those produced by earlier methods. Shells produced from these spheres were found to have a wall thickness variation of about 10%. Despite this variation, bulk properties were estimated from capacitance and impedance data. Shells tested in this work had dielectric constants (1 kHz) near 280 with loss factor of <2% and d/sub 33/ values of 68 pC/N. Thickness coupling coefficients averaged 0.51 with mechanical quality factors of <15. A transducer fabricated from these sections of spheres had a round-trip insertion loss of -20.1 dB at the center frequency of 39.8 MHz and a 6 dB bandwidth of 33%.
机译:已经制造了直径在1至10 mm范围内,壁厚为20至120 / spl mu / m的微型钛酸铅(PT)中空球。外壳部分用作预聚焦换能器的组件。球体是使用一种新的牺牲性芯技术生产的,该技术生产的数百个球体的壁厚比早期方法生产的壁厚更均匀。发现由这些球制成的壳的壁厚变化约10%。尽管存在这种差异,但还是可以根据电容和阻抗数据估算出整体性能。在这项工作中测试的外壳的介电常数(1 kHz)接近280,损耗因子<2%,d / sub 33 /值为68 pC / N。厚度耦合系数平均为0.51,机械品质因数<15。由这些球体部分制成的换能器在中心频率39.8 MHz处的往返插入损耗为-20.1 dB,带宽为6%时为33%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号