Ka-Band Characterization of Binder Jetting for 3-D Printing of Metallic Rectangular Waveguide Circuits and Antennas

摘要

The performance of additive manufactured (AM) RF circuits and antennas is continuously improving, and in some cases these AM components are comparable to state-of-the-art circuits made with traditional manufacturing techniques. Medium to high-power waveguides made with AM methods such as copper-plated plastics, selective laser melting (SLM), and copper additive manufacturing (3-D CAM) have shown good performance up to terahertz frequencies. In this paper, binder jetting (BJ) metal printing is characterized using electron beam microscopy [scanning electron microscopy (SEM)] and energy dispersive spectroscopy. The RF performance of the 3-D-printed circuits is benchmarked with Ka-band cavity resonators, waveguide sections, and a filter. An unloaded resonator Q of 616 is achieved, and the average attenuation of the WR-28 waveguide section is 4.3 dB/m. The BJ technology is tested with a meshed parabolic reflector antenna, where the illuminating horn, waveguide feed, and a filter are printed in a single piece. The antenna shows a peak gain of 24.56 dBi at 35 GHz.