...
首页> 外文期刊>IEEE Transactions on Medical Imaging >3-D reconstruction of coronary arterial tree to optimize angiographic visualization
【24h】

3-D reconstruction of coronary arterial tree to optimize angiographic visualization

机译:冠状动脉树的3D重建以优化血管造影可视化

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Due to vessel overlap and foreshortening, multiple projections are necessary to adequately evaluate the coronary tree with arteriography. Catheter-based interventions can only be optimally performed when these visualization problems are successfully solved. The traditional method provides multiple selected views in which overlap and foreshortening are subjectively minimized based on two dimensional (2-D) projections. A pair of images acquired from routine angiographic study at arbitrary orientation using a single-plane imaging system were chosen for three-dimensional (3-D) reconstruction. After the arterial segment of interest (e.g., a single coronary stenosis or bifurcation lesion) was selected, a set of gantry angulations minimizing segment foreshortening was calculated. Multiple computer-generated projection images with minimized segment foreshortening were then used to choose views with minimal overlapped vessels relative to the segment of interest. The optimized views could then be utilized to guide subsequent angiographic acquisition and interpretation. Over 800 cases of coronary arterial trees have been reconstructed, in which more than 40 cases were performed in room during cardiac catheterization. The accuracy of 3-D length measurement was confirmed to be within an average root-mean-square (rms) 3.5% error using eight different pairs of angiograms of an intracoronary guidewire of 105-mm length with eight radiopaque markers of 15-mm interdistance. The accuracy of similarity between the additional computer-generated projections versus the actual acquired views was demonstrated with the average rms errors of 3.09 mm and 3.13 mm in 20 LCA and 20 RCA cases, respectively. The projections of the reconstructed patient-specific 3-D coronary tree model can be utilized for planning optimal clinical views: minimal overlap and foreshortening. The assessment of lesion length and diameter narrowing can be optimized in both interventional cases and studies of disease progression and regression.
机译:由于血管重叠和缩短,需要使用多个投影来通过动脉造影充分评估冠状动脉树。只有成功解决了这些可视化问题,才能最佳地执行基于导管的干预。传统方法提供了多个选择的视图,其中基于二维(2-D)投影在主观上使重叠和透视缩短到最小。使用单平面成像系统以任意方向从常规血管造影研究中获取的一对图像被选择用于三维(3-D)重建。选择了感兴趣的动脉节段(例如,单个冠状动脉狭窄或分叉病变)后,计算出一组最小化节段缩短的龙门角度。然后使用多个计算机生成的投影图像,这些图像具有最小的节距缩短度,以选择相对于感兴趣的节段具有最小重叠血管的视图。然后,可以将优化的视图用于指导后续的血管造影采集和解释。重建了800多例冠状动脉树,其中超过40例在心脏导管插入过程中在室内进行。使用长度为105 mm的冠状动脉内导丝的八对不同血管造影照片和八个间距为15 mm的不透射线标记物,确认了3-D长度测量的准确度在平均均方根(rms)3.5%误差内。分别在20个LCA和20个RCA情况下,平均均方根误差为3.09 mm和3.13 mm,证明了额外的计算机生成的投影与实际获取的视图之间相似度的准确性。重建的患者专用3-D冠状动脉树模型的投影可用于规划最佳临床视图:最小的重叠和缩短。在介入病例以及疾病进展和消退研究中,可以优化病变长度和直径变窄的评估。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号