首页> 外文期刊>IEEE Transactions on Circuits and Systems. I, Regular Papers >A bootstrap technique for wideband amplifiers
【24h】

A bootstrap technique for wideband amplifiers

机译:宽带放大器的自举技术

获取原文
获取原文并翻译 | 示例
       

摘要

We propose a novel topology for a wideband amplifier, that exploits a series-shunt positive capacitive feedback to compensate the "pole-splitting" action of base-collector capacitance Cμ. Feedback is applied to a buffered differential pair to obtain a bootstrap action; the compensation network requires two capacitors and emitter degeneration resistors in the differential pair, and does not affect biasing and low frequency behavior of the amplifier. We present an AC model of the amplifier to get an insight in the behavior of the proposed compensation technique and to obtain design guidelines for maximizing the gain-bandwidth product. A case study using a 27 GHz-fT Si bipolar technology has shown a 160% gain-bandwidth enhancement with respect to a simple differential pair, and a 27% enhancement with respect to other topologies proposed in the literature.
机译:我们为宽带放大器提出了一种新颖的拓扑结构,该拓扑结构利用串联并联的正电容反馈来补偿基极-集电极电容Cμ的“分极”作用。反馈被施加到缓冲差分对以获得自举动作。补偿网络在差分对中需要两个电容器和发射极负反馈电阻,并且不会影响放大器的偏置和低频行为。我们提出了一种放大器的交流模型,以深入了解所提出的补偿技术的行为,并获得最大化增益带宽积的设计指南。使用27 GHz-fT Si双极技术的案例研究表明,相对于简单的差分对,增益带宽提高了160%,而相对于文献中提出的其他拓扑,带宽提高了27%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号