首页> 外文期刊>IEEE Microwave and Guided Wave Letters >Ka-band multistage MMIC low-noise amplifier using source inductors with different values for each stage
【24h】

Ka-band multistage MMIC low-noise amplifier using source inductors with different values for each stage

机译:KA波段多级MMIC低噪声放大器,每一级使用源电感,每个电感具有不同值

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

A Ka-band three-stage monolithic microwave integrated circuit (MMIC) low-noise amplifier using source inductors with different values for each stage has been developed for use in active phased-array receiver modules. The three-stage MMIC low-noise amplifier with 0.15/spl times/120 /spl mu/m/sup 2/ AlGaAs-InGaAs pHEMTs has achieved a noise figure of 1.6 dB, a gain of 22.8 dB, an input return loss of 29 dB, and an output return loss of 24 dB at 28 GHz by optimizing the values of source inductors for each stage. The minimum noise figure was 1.3 dB at 30 GHz.
机译:已开发出在有源相控阵接收机模块中使用的Ka波段三级单片微波集成电路(MMIC)低噪声放大器,每一级使用具有不同值的源电感器。具有0.15 / spl次/ 120 / spl mu / m / sup 2 / AlGaAs-InGaAs pHEMT的三级MMIC低噪声放大器的噪声系数为1.6 dB,增益为22.8 dB,输入回波损耗为29通过优化每个级的源电感的值,在28 GHz时具有24dB的输出回波损耗和24dB的输出回损。在30 GHz时,最小噪声系数为1.3 dB。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号