首页> 外文期刊>Frontiers of environmental science & eng >Assessing the impact on groundwater safety of inter-basin water transfer using a coupled modeling approach
【24h】

Assessing the impact on groundwater safety of inter-basin water transfer using a coupled modeling approach

机译:使用耦合建模方法评估跨流域调水对地下水安全的影响

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Surface water and groundwater always behave in a coupled manner and are major components of hydrologic cycle. However, surface water simulation models and groundwater simulation models are run separately most of the time. Few models focus on the impact of hydraulic changes in the surface water flows on the groundwater, or specifically, the impact of a water transfer project to fill a seasonally dry channel. In this study, a linked surface water and groundwater simulation model was developed to assess the impact of a trans-basin water diversion project on the groundwater. A typical plain area east of Beijing was selected as a case study, representing Beijing's main source of groundwater used for drinking water. A surface water quality model of the Chaobai River was developed based on the Water Quality Analysis Simulation Program (WASP), and a groundwater model was developed based on the Modular Finite-Difference Groundwater Flow Model (MODFLOW) and the Modular 3-D transport model (MT3D). The results of the surface water simulation were used as input for the groundwater simulation. Water levels and four contaminants (NH_3-N, COD_(Mn), F, As) were simulated. With the same initial and boundary conditions, scenario analyses were performed to quantify the impact of different quantities of diversion water on the groundwater environment. The results showed the water quality of the groundwater sources was not significantly affected.
机译:地表水和地下水总是以耦合的方式运行,并且是水文循环的主要组成部分。但是,大多数时候地表水模拟模型和地下水模拟模型是分开运行的。很少有模型关注地表水流的水力变化对地下水的影响,或者具体来说,是指调水工程填充季节性干燥河道的影响。在这项研究中,开发了一个链接的地表水和地下水模拟模型,以评估跨流域调水项目对地下水的影响。以北京东部典型的平原地区为案例研究,代表了北京饮用水的主要来源。基于水质分析模拟程序(WASP)开发了潮白河地表水水质模型,并基于模块化有限差分地下水流模型(MODFLOW)和模块化3-D运移模型开发了地下水模型。 (MT3D)。地表水模拟的结果被用作地下水模拟的输入。模拟了水位和四种污染物(NH_3-N,COD_(Mn),F,As)。在相同的初始条件和边界条件下,进行了情景分析,以量化不同数量的引水对地下水环境的影响。结果表明,地下水水源水质没有受到明显影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号