首页> 外文期刊>European Spine Journal >A biomechanical analysis of the self-retaining pedicle hook device in posterior spinal fixation
【24h】

A biomechanical analysis of the self-retaining pedicle hook device in posterior spinal fixation

机译:脊柱后路固定的自固定椎弓根钩装置的生物力学分析

获取原文
获取原文并翻译 | 示例
           

摘要

Regular hooks lack initial fixation to the spine during spinal deformity surgery. This runs the risk of posterior hook dislodgement during manipulation and correction of the spinal deformity, that may lead to loss of correction, hook migration, and post-operative junctional kyphosis. To prevent hook dislodgement during surgery, a self-retaining pedicle hook device (SPHD) is available that is made up of two counter-positioned hooks forming a monoblock posterior claw device. The initial segmental posterior fixation strength of a SPHD, however, is unknown. A biomechanical pull-out study of posterior segmental spinal fixation in a cadaver vertebral model was designed to investigate the axial pull-out strength for a SPHD, and compared to the pull-out strength of a pedicle screw. Ten porcine lumbar vertebral bodies were instrumented in pairs with two different instrumentation constructs after measuring the bone mineral density of each individual vertebra. The instrumentation constructs were extracted employing a material testing system using axial forces. The maximum pull-out forces were recorded at the time of the construct failure. Failure of the SPHD appeared in rotation and lateral displacement, without fracturing of the posterior structures. The average pull-out strength of the SPHD was 236 N versus 1,047 N in the pedicle screws (P < 0.001). The pull-out strength of the pedicle screws showed greater correlation with the BMC compared to the SPHD (P < 0.005). The SPHD showed to provide a significant inferior segmental fixation to the posterior spine in comparison to pedicle screw fixation. Despite the beneficial characteristics of the monoblock claw construct in a SPHD, that decreases the risk of posterior hook dislodgement during surgery compared to regular hooks, the SPHD does not improve the pull-out strength in such a way that it may provide a biomechanically solid alternative to pedicle screw fixation in the posterior spine.
机译:在脊柱畸形手术期间,常规的钩子缺乏对脊柱的初始固定。这在操作和矫正脊柱畸形期间冒着后钩移位的风险,这可能导致矫正丧失,钩迁移和术后结节后凸畸形。为了防止在手术过程中钩子移位,可以使用自固定椎弓根钩装置(SPHD),该装置由两个对置的钩子组成,形成一个整体式后爪装置。 SPHD的初始节段后固定强度尚不清楚。设计尸体椎骨模型中后节段脊柱固定的生物力学拉拔研究,以研究SPHD的轴向拉拔强度,并与椎弓根螺钉的拉拔强度进行比较。在测量每个单独的椎骨的骨矿物质密度之后,将十个猪的腰椎椎体与两个不同的器械构造成对地器械。使用轴向力的材料测试系统提取仪器构造。在构造失败时记录最大拉出力。 SPHD的失败出现在旋转和横向移位中,而后部结构没有破裂。 SPHD的平均拔出强度为236 N,而椎弓根螺钉的平均拉出强度为1,047 N(P <0.001)。与SPHD相比,椎弓根螺钉的抗拉强度与BMC的相关性更高(P <0.005)。与椎弓根螺钉固定相比,SPHD显示出对后椎的明显下节段固定。尽管SPHD中整体式爪构造具有有益的特性,与常规钩相比,可减少手术过程中后钩移位的风险,但SPHD不能以提供生物力学上可靠的替代方式来提高拉出强度。椎弓根螺钉固定在后椎。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号