...
首页> 外文期刊>European Journal of Control >A Stacked Model Structure for Off-line Parameter Variation Estimation in Multi-equilibria Nonlinear Systems
【24h】

A Stacked Model Structure for Off-line Parameter Variation Estimation in Multi-equilibria Nonlinear Systems

机译:多平衡非线性系统离线参数变化估计的堆叠模型结构

获取原文
获取原文并翻译 | 示例

摘要

Preventive diagnostics and maintenance of complex dynamic systems such as chemical plants and aircraft engines benefit from knowledge of the system components. The conditions of the components are often represented by the parameters of the system, in which case the current conditions of the components can be deduced from the variations of the system parameters about their nominal values. This paper considers nonlinear dynamic systems that tend to operate about equilibrium points and focuses on off-line estimation of the variations of important parameters about their nominal values. It uses the common practice of treating the parameter variation estimation vector as a subset of a large state vector, which here is formed by stacking state-space plant descriptions corresponding to selected equilibrium points. A fundamental problem for parameter estimation, no matter which parameter estimation method is used, is that the parameters of interest may not be observable unless data from an appropriate number and combination of equilibrium points is used in the estimation process. Using analysis based on linearized models, this paper establishes criteria for selecting the combinations of equilibrium points that, when stacked, render the parameter vector observable in the sensor data collected about these equilibrium points. A nonlinear filter is then applied to estimate the parameter variation vector as part of the augmented (or stacked) state vector. Numerical simulation results of a Continuously Stirred Tank Reactor verify the theory. In particular, it is seen, as predicted by the theory, that data from one, two or three equilibrium points is not sufficiently rich to yield information about each parameter variation. It is also seen that not all arbitrary combinations of four equilibrium points can provide the information required for estimation of the parameter variation vector; only combinations that satisfy the proposed criteria were able to yield successful estimation of all parameters.
机译:复杂动态系统(如化工厂和飞机发动机)的预防性诊断和维护受益于系统组件的知识。组件的状态通常由系统的参数表示,在这种情况下,组件的当前状态可以从系统参数关于其标称值的变化中得出。本文考虑了倾向于在平衡点附近运行的非线性动力学系统,并着重于重要参数与其标称值的变化的离线估计。它使用将参数变化估计向量视为大状态向量的子集的常规做法,在这里是通过堆叠对应于选定平衡点的状态空间工厂描述来形成的。无论使用哪种参数估计方法,参数估计的一个基本问题是,除非在估计过程中使用了来自适当数量和平衡点组合的数据,否则可能无法观察到目标参数。使用基于线性化模型的分析,本文建立了选择平衡点组合的标准,当这些标准点堆叠在一起时,这些参数点使得在有关这些平衡点的传感器数据中可观察到参数向量。然后,应用非线性滤波器来估计参数变化向量,作为增强(或堆叠)状态向量的一部分。连续搅拌釜反应器的数值模拟结果验证了该理论。尤其是,正如该理论所预测的那样,可以看到来自一个,两个或三个平衡点的数据不足以产生关于每个参数变化的信息。还可以看出,并非所有四个平衡点的任意组合都可以提供估计参数变化矢量所需的信息。只有满足建议标准的组合才能成功估算所有参数。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号