首页> 外文期刊>Environmental toxicology and chemistry >CRITICAL LOAD ANALYSIS IN HAZARD ASSESSMENT OF METALS USING A UNIT WORLD MODEL
【24h】

CRITICAL LOAD ANALYSIS IN HAZARD ASSESSMENT OF METALS USING A UNIT WORLD MODEL

机译:基于世界模型的金属危险性评估中的关键载荷分析

获取原文
获取原文并翻译 | 示例
       

摘要

A Unit World approach has been used extensively to rank chemicals for their hazards and to understand differences in chemical behavior. Whereas the fate and effects of an organic chemical in a Unit World Model (UWM) analysis vary systematically according to one variable (fraction of organic carbon), and the chemicals have a singular ranking regardless of environmental characteristics, metals can change their hazard ranking according to freshwater chemistry, notably pH and dissolved organic carbon (DOC). Consequently, developing a UWM approach for metals requires selecting a series of representative freshwater chemistries, based on an understanding of the sensitivity of model results to this chemistry. Here we analyze results from a UWM for metals with the goal of informing the selection of appropriate freshwater chemistries for a UWM. The UWM loosely couples the biotic ligand model (BLM) to a geochemical speciation model (Windermere Humic Adsorption Model [WHAM]) and then to the multi-species fate transport-speciation (Transpec) model. The UWM is applied to estimate the critical load (CL) of cationic metals Cd, Cu, Ni, Pb, and Zn, using three lake chemistries that vary in trophic status, pH, and other parameters. The model results indicated a difference of four orders of magnitude in particle-to-total dissolved partitioning (Kd) that translated into minimal differences in fate because of the short water residence time used. However, a maximum 300-fold difference was calculated in Cu toxicity among the three chemistries and three aquatic organisms. Critical loads were lowest (greatest hazard) in the oligotrophic water chemistry and highest (least hazard) in the eutrophic water chemistry, despite the highest fraction of free metal ion as a function of total metal occurring in the mesotrophic system, where toxicity was ameliorated by competing cations. Water hardness, DOC, and pH had the greatest influence on CL, because of the influence of these factors on aquatic toxicity. Environ. Toxicol. Chem.
机译:单位世界方法已被广泛用于对化学品的危害进行排名并了解化学行为的差异。尽管在单位世界模型(UWM)分析中有机化学品的命运和影响会根据一个变量(有机碳的分数)系统地变化,并且无论环境特征如何,这些化学品的排名都是单一的,金属可以根据淡水化学,尤其是pH和溶解有机碳(DOC)。因此,基于对模型结果对该化学敏感性的理解,开发用于金属的UWM方法需要选择一系列代表性的淡水化学。在这里,我们分析金属的UWM的结果,目的是为UWM选择合适的淡水化学物质。 UWM将生物配体模型(BLM)与地球化学物种模型(Windermere Humic Adsorption Model [WHAM])松散耦合,然后与多物种命运转运物种(Transpec)模型耦合。使用三种在营养状态,pH和其他参数上有所不同的湖泊化学方法,将UWM应用于估算阳离子金属Cd,Cu,Ni,Pb和Zn的临界载荷(CL)。模型结果表明,由于使用的水停留时间短,因此颗粒与总溶解分配(Kd)的差异达到四个数量级,这转化为最终的差异。但是,在三种化学物质和三种水生生物之间,Cu毒性的最大差异是300倍。尽管在中营养系统中,游离金属离子占总金属的函数最高,但在贫营养水化学中,临界负荷最低(最大危害),在富营养化水化学中最高(最低危害)。竞争阳离子。由于这些因素对水生毒性的影响,水的硬度,DOC和pH对CL的影响最大。环境。毒药。化学

著录项

  • 来源
    《Environmental toxicology and chemistry》 |2011年第9期|p.2157-2166|共10页
  • 作者单位

    Department of Chemical Engineering and Applied Chemistry, University of Toronto, Toronto, Ontario, Canada;

    Department of Chemical Engineering and Applied Chemistry, University of Toronto, Toronto, Ontario, Canada,Ontario Ministry of Environment, Etobicoke, Ontario, Canada;

    Department of Chemical Engineering and Applied Chemistry, University of Toronto, Toronto, Ontario, Canada,Department of Geography, University of Toronto, Toronto, Ontario, Canada;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);美国《化学文摘》(CA);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    unit world model; metals; fate/transport; ecotoxicity; critical load;

    机译:单位世界模型;金属;命运/运输生态毒性临界负荷;
  • 入库时间 2022-08-17 13:31:38

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号