Laboratory study on engineering geological characteristics and formation mechanism of altered rocks of Henan Tianchi pumped storage power station, China

摘要

Concentrations of biotite flakes were distributed at multiple locations during the site investigation for the Tianchi Pumped Storage Power Station project in Henan Province, China. Rock mass was highly weathered on both sides of a prominent fault, and a large number of white and gray, locally yellow-brown, argillaceous agglomerations were observed. The local core at the end of the ZK44 hole presented a gray and white sandstone structure. Petrochemical tests, which included sheet identification, scanning electron microscopy, electron probe analysis, and X-ray diffraction, showed that the main alteration types were mica-rich-type altered rocks and clay-type altered rocks, which were accompanied by chlorite, epidote, actinolite, and other alteration minerals. According to the mechanical test results, the smallest antidisintegration index was 84 %, disintegration was easily accomplished, the maximum axial free expansion rate was 0.00204 %, the maximum free expansion rate in the radial direction was 0.0178 %, and maximum lateral constrained expansion rate was 0.0194 %. The swelling pressure of all the specimens did not exceed 10 kPa, and the clay-type altered rocks exhibited three large expansion parameters. Uniaxial and triaxial compression tests showed that the strength of granite, as reflected by its deformation and elastic moduli, decreased to values even lower than those of highly weathered rocks because of alteration. The poor characteristics of the altered rock presented great challenges for support or lining during the construction and operation stages. After excavation, the expanded altered rocks should be cleaned up immediately, the support or lining should be in place immediately, and water should be drained in time.