...
首页> 外文期刊>Energy >Experimental investigation of a MnCl2/CaCl2-NH3 two-stage solid sorption freezing system for a refrigerated truck
【24h】

Experimental investigation of a MnCl2/CaCl2-NH3 two-stage solid sorption freezing system for a refrigerated truck

机译:冷藏车MnCl2 / CaCl2-NH3两级固体吸附冷冻系统的实验研究

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

A MnCl2/CaCl2-NH3 two-stage solid sorption freezing system consisting of a MnCl2 sorption bed, a CaCl2 sorption bed, an evaporator and a condenser is established for a refrigerated truck, for which the required refrigerating capacity is 1.13 kW at a refrigerating temperature of -5 degrees C, Composite adsorbents of MnCl2 and CaCl2 developed by expanded natural graphite treated with sulfuric acid are utilized. The sorption/desorption process and the resorption process are coupled in the two-stage cycle. The experimental results show that the maximum refrigerating capacity of 1.25 kW and COP (coefficient of performance) of 0.143 are obtained at a resorption time of 120 min when the hot air and refrigerating temperatures are 230 degrees C and 5 degrees C, respectively. In addition, the refrigerating capacity of 1.19 kW is achieved even when the hot air temperature is as low as 210 degrees C, and such a result can satisfy the requirement for transporting fresh goods. The refrigerating capacity is 1.32 kW when the hot air and refrigerating temperatures are 270 degrees C and 10 degrees C, respectively, and the data are higher than the required refrigerating capacity. However, for refrigerating temperatures of 15 degrees C and 18 degrees C, the refrigerating capacity experimentally obtained could meet the requirement only when a truck is utilized for long-distance transportation. (C) 2016 Elsevier Ltd. All rights reserved.
机译:建立了用于冷藏车的MnCl2 / CaCl2-NH3两级固体吸附冷冻系统,该系统由MnCl2吸附床,CaCl2吸附床,蒸发器和冷凝器组成,其在制冷温度下的所需制冷量为1.13 kW在-5℃下,使用了由硫酸处理的膨胀天然石墨形成的MnCl 2和CaCl 2的复合吸附剂。吸附/解吸过程和再吸收过程以两阶段循环耦合。实验结果表明,当热空气和制冷温度分别为230摄氏度和5摄氏度时,在120分钟的吸收时间下可获得1.25千瓦的最大制冷能力和0.143的COP(性能系数)。另外,即使在热风温度低至210℃的情况下,也能够达到1.19kW的制冷能力,能够满足新鲜食品的运输要求。当热空气和制冷温度分别为270摄氏度和10摄氏度时,制冷能力为1.32 kW,并且数据高于所需的制冷能力。然而,对于15℃和18℃的冷藏温度,仅当卡车被用于长途运输时,实验上获得的冷藏能力才能够满足要求。 (C)2016 Elsevier Ltd.保留所有权利。

著录项

  • 来源
    《Energy》 |2016年第15期|16-26|共11页
  • 作者单位

    Shanghai Jiao Tong Univ, MOE, Key Lab Power Machinery & Engn, Inst Refrigerat & Cryogen, Shanghai 200240, Peoples R China;

    Shanghai Jiao Tong Univ, MOE, Key Lab Power Machinery & Engn, Inst Refrigerat & Cryogen, Shanghai 200240, Peoples R China;

    Shanghai Jiao Tong Univ, MOE, Key Lab Power Machinery & Engn, Inst Refrigerat & Cryogen, Shanghai 200240, Peoples R China;

    Shanghai Jiao Tong Univ, MOE, Key Lab Power Machinery & Engn, Inst Refrigerat & Cryogen, Shanghai 200240, Peoples R China;

    CIMC Vehicles Shan Dong Co Ltd, Jinan 250299, Peoples R China;

    CIMC Vehicles Shan Dong Co Ltd, Jinan 250299, Peoples R China;

    Yuanhua Gas Equipment Co Ltd, Suzhou 215164, Peoples R China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Solid sorption freezing system; Two-stage; Composite adsorbent; Refrigerated truck; Exhaust heat;

    机译:固体吸附冷冻系统;二级;复合吸附剂;冷藏车;排热;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号