...
首页> 外文期刊>Energy >Optimization of the in situ transesterification step for biodiesel production using biomass of Yarrowia lipolytica NCIM 3589 grown on waste cooking oil
【24h】

Optimization of the in situ transesterification step for biodiesel production using biomass of Yarrowia lipolytica NCIM 3589 grown on waste cooking oil

机译:使用在废食用油上生长的解脂耶氏酵母NCIM 3589的生物质优化生物柴油生产的原位酯交换步骤

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The in situ (one-step) acid-catalyzed transesterification step for conversion to biodiesel of biomass from oleaginous yeast Yarrowia lipolytica grown on waste cooking oil (WCO) is studied. The process yield of biodiesel was optimized by investigating effects of various parameters, namely, biomass, methanol, chloroform, catalyst, temperature, time and sonication. A Plackett-Burman statistical design of experiments revealed that biomass is the most significant factor influencing biodiesel (FAME, fatty acid methyl ester) production. Subsequently, a one variable design (OVD) of experiments for increased biomass loadings showed higher yields of FAME with no additional requirement of reactants, solvents or special equipment. The biomass grown on WCO had a lipid productivity of 0.042 g L-1 h(-1) and 4 g of this loading gave a high FAME yield of 0.88 gin 8 hat 50 degrees C with methanol: chloroform (10:1) and acid catalyst (0.2 M H2SO4,1.0 ml g(-1)). The FAME profile had desirable amounts of saturated (32.81%), monounsaturated (36.41%), polyunsaturated (30.59%) methyl esters. The predicted and experimentally determined physico-chemical properties of FAME were found in accordance with specified international standards. Thus, the direct one-pot in situ transesterification reaction using Y. lipolytica biomass grown on WCO provides a high yield of biodiesel with potential applicability while simultaneously addressing the management of this pollutant. (C) 2017 Elsevier Ltd. All rights reserved.
机译:研究了原位(一步法)酸催化的酯交换步骤,该步骤可将废食用油(WCO)上生长的油质酵母解脂耶氏酵母转化为生物质。通过研究生物质,甲醇,氯仿,催化剂,温度,时间和超声处理等各种参数的影响,优化了生物柴油的工艺产量。 Plackett-Burman实验的统计设计表明,生物质是影响生物柴油(FAME,脂肪酸甲酯)生产的最重要因素。随后,用于增加生物量负载的一种可变设计(OVD)实验表明,FAME的收率更高,而无需额外要求反应物,溶剂或特殊设备。在WCO上生长的生物质具有0.042 g L-1 h(-1)的脂质生产率,其中4 g的这种化合物在甲醇:氯仿(10:1)和酸的条件下,在50摄氏度下的FAME产率高达0.88 gin。催化剂(0.2 M H2SO4,1.0 ml g(-1))。 FAME曲线具有所需数量的饱和(32.81%),单不饱和(36.41%),多不饱和(30.59%)甲酯。根据指定的国际标准,发现了FAME的预测和实验确定的理化性质。因此,使用在WCO上生长的解脂耶氏酵母生物质的直接一锅就地酯交换反应提供了具有潜在适用性的高产量生物柴油,同时解决了该污染物的管理问题。 (C)2017 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号