首页>外文会议>其他>World Virtual Conference on Advanced Research in Materials and Engineering Applications

World Virtual Conference on Advanced Research in Materials and Engineering Applications

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Pyrolysis of Empty Fruit Bunch (EFB) in a vertical fixed bed reactor

机译：垂直固定床反应器中空果束（EFB）的热解
- 作者：K. Azduwin;M. J. M. Ridzuan;A. R. Mohamed;S. M. Hafis
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Pyrolysis;
- Renewable energy;
- Bio-oil;
- Empty fruit bunch (EFB);
- Fixed bed reactor;
2.Effect of circulation flowrate on the performance of a spiral finned freeze concentrator

机译：循环流动对螺旋翅冻浓缩器性能的影响
- 作者：SHAFIRAH Samsuri;NURUL AINI Amran;NORZITA Ngadi;ZAKI YAMANI Zakaria;MAZURA Jusoh
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Progressive freeze concentration;
- Crystallizer;
- Effective partition constant;
- Recovered solute;
3.Influence of Mortar Incorporating Silica Based Waste Material on the Formation of C-S-H and Mechanical Strength Properties

机译：砂浆掺入二氧化硅废料对C-S-H形成的影响及机械强度性能
- 作者：Nafisa Tamanna;Norsuzailina Mohamed Sutan;Ibrahim Yakub;Delsye Teo Ching Lee;Ezzaq Farhan Ahmad
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Cement replacement;
- Compressive Strength;
- Calcium Silicate Hydrate (C-S-H);
- Glass powder;
- Pozzolan;
4.The Effects of Winding Angles and Elevated Temperatures on the Crushing Behaviour of Glass Fibre/Epoxy Composite Pipes

机译：绕组角的影响和升高温度对玻璃纤维/环氧复合管的破碎行为
- 作者：S. N. Fitriah;M. S. Abdul Majid;R. Daud;M. Afendi
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Glass fibre reinforced epoxy;
- Crushing behavior;
- Compression test;
- Elevated temperature;
- Different winding angles;
5.The Synthesis of In-situ Cu-NbC-VC Nanocomposites by Mechanical Alloying

机译：机械合金化在原位Cu-NBC-VC纳米复合材料的合成
- 作者：Wan Mohd Hilmi Hussein Wan Omar;Nurulhuda Bashirom;Zuhailawati Hussain;Indra Putra Almanar;Wan Abdul Rahman Assyahid Wan Ibrahim
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Nanocomposite;
- Niobium Carbide;
- Vanadium Carbide;
- Mechanical alloying;
- Microwave sintering;
6.Investigations on Composite Flexural Behaviour with Inclusion of CNT Enhanced Silica Aerogel in Epoxy Nanocomposites

机译：用CNT增强二氧化硅气凝胶在环氧纳米复合材料中的复合弯曲行为研究
- 作者：Norkhairunnisa Mazlan;Norasiah Termazi;Suraya Abdul Rashid;Saeed Rahmanian
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Flexural;
- CNT;
- Silica Aerogel;
- CVD;
7.The Deflection of the Shape Memory Alloy Composite Beams using Finite Element Method

机译：使用有限元方法的形状记忆合金复合梁的偏转
- 作者：Z. A. Rasid;R. Zahari
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Thermal instability;
- Carbon nanotube;
- Functionally graded material;
- Laminated composite plate;
- Finite element method;
8.Effect of TiO_2 Mixed CaO Catalyst in Palm Oil Transesterification

机译：TiO_2混合CaO催化剂在棕榈油酯交换中的影响
- 作者：Mardhiah Mohamad;Norzita Ngadi
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Biodiesel fuel;
- Cooking oil;
- Transesterification;
- CaO-TiO_2 catalyst;
9.Sauter Mean Diameter Profiles of Droplets in a Continuous Spray Stream

机译：连续喷雾流中的液滴的平均直径曲线
- 作者：Muhammad Yasin Naz;Shaharin A. Sulaiman;Bambang Ariwahjoedi
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- SMD Profiles;
- Continuous Spray Mode;
- Phase Doppler Anemometry;
10.Effect of Pressure and Nozzle Angle of Minimal Quantity Lubrication on Cutting Temperature and Tool Wear in Turning

机译：最小数量润滑的压力和喷嘴角度对转动温度和工具磨损的影响
- 作者：A. Yassin;C. Y. Teo
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Pressure;
- Nozzle Angle;
- Minimal Quantity Lubrication (MQL);
- Cutting Temperature;
- Flank Wear;
11.PARAMETER OPTIMIZATION OF AA6061-AA7075 DISSIMILAR FRICTION STIR WELDING USING THE TAGUCHI METHOD

机译：AA6061-AA7075使用TAGUCHI方法进行AA6061-AA7075不同摩擦搅拌焊接的参数优化
- 作者：L. H. Shah;N. F. Zainal Ariffin;Akhtar Razul Razali
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Friction stir welding;
- Dissimilar welding;
- Taguchi method;
- Parameter optimization;
12.Effects of the Processing Methods on the Gas Permeability of PLA/Sepiolite Thin Films: Solution Casting versus Thermo Compression

机译：加工方法对PLA /海硫醇薄膜液态渗透性的影响：溶液浇铸与热压缩
- 作者：NIMA Moazeni;ZURINA Mohamad;Nazila Dehbari
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Poly Lactic Acid;
- Nanocomposite;
- Sepiolite;
- Gas permeability;
- Thin Film;
13.Recycled High Density Polyethylene/Ethylene Vinyl Acetate (RHDPE/EVA)/Taro (Colocasia Esculenta) Composites: The Effect of Caprolactam-Maleic Anhydride on Tensile Properties and Swelling Behaviour

机译：再循环高密度聚乙烯/乙烯乙酸乙烯乙烯酯（RHDPE / EVA）/芋头（Colocasia Esculuya）复合材料：己内酰胺 - 马来酸酐对拉伸性能和溶胀行为的影响
- 作者：A. R. H. Fatimah;A. G. Supri;Z. Firuz
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Polymer Composites;
- Recycled High Density Polyethylene;
- Ethylene Vinyl Acetate;
- Taro Fillers;
- Caprolactam-Maleic Anhydride;
14.The Thermal Instability Analysis of Functionally Graded Carbon Nanotube Composite Plates using Finite Element Method

机译：用有限元法的功能梯碳纳米管复合板的热稳定性分析
- 作者：Z. A. Rasid;H. Yahaya
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Thermal instability;
- Carbon nanotube;
- Functionally graded material;
- Laminated composite plate;
- Finite element method;
15.Numerical Simulation of Stress Shielding Induced by Crack Interaction in Human Phalanx Bone

机译：人料骨烷骨裂纹相互作用诱导应力屏蔽的数值模拟
- 作者：S. A. Abdul Halim;N. A. Md Zain;N. N. Mansor;R. Daud;Y. Bajuri
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
16.Effects of alkaline treatments on the tensile strength of Napier grass fibres

机译：碱性处理对纳皮尔草纤维拉伸强度的影响
- 作者：M. Haameem J. A.;M. S. Abdul Majid;Haslan M.;M. Afendi;Helmi E. A.;I. Fahmi
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Natural fibre;
- Napier grass fibre;
- Single fibre tensile test;
- Sodium Hydroxide;
17.Numerical analysis on the effects of mixed convection of particles removal flow over heated cavity using Multi-Relaxation Time Thermal Lattice Boltzmann Method

机译：用多松弛时间热格螺栓玻璃法测定粒子移除流动混合流动混合对流效应的数值分析
- 作者：Nor Azwadi Che Sidik;Aman Ali Khan
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Lattice Boltzmann Method;
- Multi-Relaxation-Time;
- Double-distribution function;
- Mixed convection;
- Grashof number;
- Removal efficiency;
18.Sustainable Analysis in the Product Development of Al-Metal Matrix Composites Automotive Component

机译：Al-Metal矩阵复合材料汽车组分产品开发的可持续分析
- 作者：N. Fatchurrohman;Ismed Iskandar;S. Suraya;Kartina Johan
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Sustainable analysis;
- Al-metal matrix composites;
- Automotive component;
- Brake disc;
19.A NARRATIVE REVIEW OF MORPHOLOGY OF CANCELLOUS BONE AT DIFFERENT HUMAN ANATOMY- METHODS AND PARAMETERS

机译：不同人解剖学方法和参数的松质骨形态的叙事综述
- 作者：Rabiatul A. A. R;Fatihhi S. J.;Harun M. N.;Kadir M. R. A.;Ardiyansyah Syahrom
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Cancellous Bone;
- Trabecular Bone;
- Morphology;
- Human Anatomy;
- Methods;
20.INVESTIGATION OF AUTO-IGNITION OF HEPTANE-CNG MIXTURE IN HCCI ENGINE

机译：HCCI发动机庚烷-CNG混合物自燃的研究
- 作者：Firmansyah;A. Rashid. A. Aziz
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Autoignition;
- Dual fuel;
- Heptane;
- CNG;
21.Effect of the Formation of CuO Flowers and SnO_2 on the Growth of Tin Whiskers on Immersion Tin Surface Finish

机译：Cuo花和SnO_2形成对浸渍锡表面光洁度罐晶须生长的影响
- 作者：Nor Akmal Fadil;Siti Zahira Yusof;Ali Ourdjini;Tuty Asma Abu Bakar
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Tin whiskers;
- Immersion tin surface finish;
- CuO flowers;
- SnO_2;
- JEDEC standard No. 22-A121A;
22.Computational Analysis of Nanofluids in Heat Exchanger

机译：换热器纳米流体的计算分析
- 作者：Nor Azwadi Che Sidik;Chan Shi Wei;Alireza Fazeli
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Computational Analysis;
- Nanofluid;
- Heat Exchanger;
23.Performance and Emissions of a Micro-Gas Turbine Fueled with LPG/Producer gas in a Dual Fuel Mode

机译：用LPG /生产者在双燃料模式下推动微燃气轮机的性能和排放
- 作者：Hussain Sadig;Shaharin A. Sulaiman;Mior A. Said;S. Yusup
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Gas turbine;
- Syngas;
- Producer gas;
- Performance;
- Emissions;
24.Jet Impingement Cooling System on the Pressure Side of Turbine Blade

机译：涡轮叶片压力侧喷气冲击冷却系统
- 作者：Mohamad Nor Musa;Mohamed Izhar Mohamed Khalid
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Jet impingement cooling;
- Turbine blade;
- Cooling effectiveness;
- Reynolds number;
- Nusselt number;
25.Modelling of Flow Structure and Pollutant Dispersion in Symmetric Street Canyon

机译：对称街道峡谷流动结构与污染物分散的建模
- 作者：Nur Hamizah Mohamad Yusoff;Nor Azwadi Che Sidik
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Symmetric street canyon;
- K-ε model;
- Flow structure;
- Pollutant dispersion;
- FLUENT;
26.Numerical Simulation of Stress Change during Wellbore Injection

机译：井眼注射过程中应力变化的数值模拟
- 作者：Mahmood Bataee;Sonny Irawan
- 会议名称：《World Virtual Conference on Advanced Research in Materials and Engineering Applications》 | 2015年
- Numerical Simulation;
- Finite volume;
- Wellbore studies;
- Stress State;
- Injection;