Optimization of Dimensional Tolerances and Material Removal Rate in the Orthogonal Turning of AISI 4340 Steel

摘要

Turning is one of the most used metal removal operations in the industry. It can remove material faster, giving reasonably good surface quality apart from geometrical requirements. Conformity of geometry is one of the most significant requirements of turned components to perform their intended functions. Apart from dimensional requirements, the important geometrical necessities are Circularity, Straightness, Cylindricity, Perpendicularity, etc. Since they have a direct influence on the functioning of the components, the effect of the cutting parameters on them has greater significance. In this paper experiments are carried out to examine the effect of turning parameters such as cutting speed, feed rate, and depth of cut on responses like; straightness, roundness, surface roughness, and material removal rate during turning of AISI 4340 steel. Analysis of Variance (ANOVA) is performed and the influence of parameters on each response is studied. The optimal values of parameters obtained from the study are further confirmed by conducting experiments.