首页>外文期刊>Periodica polytechnica

Periodica polytechnica

中文名称：理工学院定期

ISSN：0324-6051
出版周期：Semiannual

发文量：208

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.Investigation of heparin binding capacity of polyurethane coatings

机译：Investigation of heparin binding capacity of polyurethane coatings
- 作者：Liza Pelyhe
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2010年第2期
- Coronary stent;
- Polyurethane coating;
- Heparin binding;
2.Mechanical, Thermal and Morphological Properties of Injection Molded Poly(lactic acid)/Calcium Carbonate Nanocomposites

机译：Mechanical, Thermal and Morphological Properties of Injection Molded Poly(lactic acid)/Calcium Carbonate Nanocomposites
- 作者：Wen Shyang Chow;Ying Ying Leu;Zainal Arifin Mohd Ishak
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2016年第1期
- Nanocomposites;
- Poly(lactic acid);
- Nano-calcium carbonate;
- Maleated rubber;
- Properties;
3.A Novel Floor Sensor Network Technology Based on Dielectric Electro-Active Polymers

机译：A Novel Floor Sensor Network Technology Based on Dielectric Electro-Active Polymers
- 作者：Akos Pinter
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2015年第4期
- Surveillance monitoring;
- Pressure sensor;
- Thin film sensors;
- Capacitive sensor;
- Dielectric films;
- Capacitance measurement;
4.EXAMINATION OF THE TENSILE STATE OF FIBERS IN BRAIDED FIBER REINFORCED COMPOSITE TUBES

机译：EXAMINATION OF THE TENSILE STATE OF FIBERS IN BRAIDED FIBER REINFORCED COMPOSITE TUBES
- 作者：Balazs ZSIGMOND;Laszlo M. VAS
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2006年第1期
- Braiding;
- Contraction;
- Fiber reinforced composite;
5.Analysis of energy consumption of air handling units based on probability theory

机译：Analysis of energy consumption of air handling units based on probability theory
- 作者：Laszlo Kajtar;Miklos Kassai
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2008年第2期
- Air handling units;
- Energy consumption;
- Probability theory;
6.Predicting the Performance of an Industrial Centrifugal Fan Incorporating Cambered Plate Impeller Blades

机译：Predicting the Performance of an Industrial Centrifugal Fan Incorporating Cambered Plate Impeller Blades
- 作者：Lucio Cardillo;Alessandro Corsini;Giovanni DelibraFranco RispoliAnthony G. SheardPaolo Venturini
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2014年第1期
- Industrial Fan;
- Centrifugal Fan;
- Fan Performance Prediction;
- Erosion prediction;
- Open Source Solver;
- Computational Fluid Dynamics;
7.FE MODELLING OF THE MOUNTING PROCESS OF METAL SCREW AND COMPOSITE PART

机译：FE MODELLING OF THE MOUNTING PROCESS OF METAL SCREW AND COMPOSITE PART
- 作者：Csilla ERDOS-SELLEY
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2004年第2期
- FEM;
- Thread cutting;
- Composite;
8.BASALT FIBER AS A REINFORCEMENT OF POLYMER COMPOSITES

机译：BASALT FIBER AS A REINFORCEMENT OF POLYMER COMPOSITES
- 作者：Tibor CZIGANY;Janos VAD;Kernel POLOSKEI
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2005年第1期
- Basalt fiber;
- Fiber head;
- Polypropylene composites;
- Fracture toughness;
- Model of basalt fiber production;
9.Effect of grain boundary structure on the intercrystalline damaging of austenic steel during brazing

机译：Effect of grain boundary structure on the intercrystalline damaging of austenic steel during brazing
- 作者：Kernel Majlinger;Peter Janos Szabo
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2011年第2期
- Austenitic steel;
- Copper brazing;
- Intercrystalline cracking;
- Electron backscatter diffraction;
10.VALIDATION OF A COMPUTATIONAL FLUID DYNAMICS METHOD TO BE APPLIED TO LINEAR CASCADES OF TWISTED-SWEPT BLADES

机译：VALIDATION OF A COMPUTATIONAL FLUID DYNAMICS METHOD TO BE APPLIED TO LINEAR CASCADES OF TWISTED-SWEPT BLADES
- 作者：Gergely RABAI;Janos VAD
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2005年第2期
11.Energetic utilisation of biogases in IC engines

机译：Energetic utilisation of biogases in IC engines
- 作者：Viktoria Barbara Kovacs;Attila Meggyes
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2009年第1期
- Renewable;
- Biogas;
- IC engine;
- Power;
- Efficiency;
- Indication;
- Heat release;
- Exhaust emission;
12.Modeling blood flow in the arterial system

机译：Modeling blood flow in the arterial system
- 作者：Gergely Bardossy;Gabor Halasz
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2011年第1期
- Blood flow modeling;
- Arteries;
- Method of characteristics;
- Arteriosclerosis;
13.Incorporation of forward blade sweep in the non-free vortex design method of axial flow turbomachinery rotors

机译：Incorporation of forward blade sweep in the non-free vortex design method of axial flow turbomachinery rotors
- 作者：Janos Vad
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2001年第2期
14.FINITE ELEMENT MODELLING OF WEAR PROCESS OF A PEEK-STEEL SLIDING PAIR AT ELEVATED TEMPERATURE

机译：FINITE ELEMENT MODELLING OF WEAR PROCESS OF A PEEK-STEEL SLIDING PAIR AT ELEVATED TEMPERATURE
- 作者：Laszlo KONYA;Karoly VARADI;Klaus FRIEDRICH
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2005年第1期
- Wear simulation;
- Thermal expansion;
- Creep;
- PEEK;
- Pin-on-disc configuration;
15.GROBNERSCHE BASEN IN SPEZIELLEN RINGEN (AUS DER GESCHICHTE DER GROBNERSCHEN BASEN)

机译：GROBNERSCHE BASEN IN SPEZIELLEN RINGEN (AUS DER GESCHICHTE DER GROBNERSCHEN BASEN)
- 作者：Jan CIZMAR
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2002年第1期
- Grobner basis;
- Buchberger's algorithm;
- Mora's algorithm;
- Standard basis;
16.Evaporation of Renewable Fuels in a Lean Premixed Prevaporized Burner

机译：Evaporation of Renewable Fuels in a Lean Premixed Prevaporized Burner
- 作者：Viktor Jozsa;David Csemany
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2016年第2期
- Lean premixed prevaporized;
- Air blast atomization;
- Evaporation;
- Renewable fuel;
17.Study of Pressure-Sensitive Materials for Floor Sensor Networks

机译：Study of Pressure-Sensitive Materials for Floor Sensor Networks
- 作者：Akos Pinter;Antal Huba
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2016年第1期
- Surveillance monitoring;
- Pressure measurement;
- Piezoresistive films;
- Piezoelectric films;
- Ferroelectret films;
- Dielectric films;
18.A transformation technique for efficient shape optimization in CAD/CAE environment

机译：A transformation technique for efficient shape optimization in CAD/CAE environment
- 作者：Gabor Kortelyesi;Csilla Erdos-Selley
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2008年第1期
- CAD-based shape optimization;
- Optimization model;
19.Computer tomography based reconstruction of metal matrix syntactic foams

机译：Computer tomography based reconstruction of metal matrix syntactic foams
- 作者：I. Kozma;Ibolya Zsoldos;G. DorogiSz. Papp
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2014年第2期
- Syntactic foam;
- CT based reconstruction;
20.The effect of the manufacturing parameters on the surface hardness and shrinkage of polyurethane integral skin foam products

机译：The effect of the manufacturing parameters on the surface hardness and shrinkage of polyurethane integral skin foam products
- 作者：Peter Grob
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2008年第2期
- Processing technologies;
- Industrial applications;
- Design of experiments;
- Polyurethane;
21.A Simplified Modeling Approach for Rolling Piston Compressors

机译：A Simplified Modeling Approach for Rolling Piston Compressors
- 作者：Balazs Farkas;Viktor Szente;Jeno Miklos Suda
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2015年第4期
- Rotary compressor;
- Rolling piston compressor;
- CFD;
- Porous resistance model;
22.Determination of Stress Intensity Factor in Concrete Material Under Brazilian Disc and Three-Point Bending Tests Using Finite Element Method

机译：Determination of Stress Intensity Factor in Concrete Material Under Brazilian Disc and Three-Point Bending Tests Using Finite Element Method
- 作者：Djamila Benarbia;Mohamed Benguediab
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2015年第4期
- Propagation of the cracks;
- Stress intensity factor;
- Three-points bending;
- Brazilian disc;
- Fractures mechanics;
- Finite element method;
23.Beamforming measurements of an axial fan in an industrial environment

机译：Beamforming measurements of an axial fan in an industrial environment
- 作者：Tamas Benedek;Peter Toth
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2013年第2期
- Axial fan;
- Phased array microphones;
- Beamforming;
- Rotating source model;
- Industrial environment;
24.Optimal opportunities at stone machining processes done by diamond tool

机译：Optimal opportunities at stone machining processes done by diamond tool
- 作者：Istvan Gabor Gyurika
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2011年第2期
- Stone machining;
- Cutting;
- Productivity;
- Optimization;
- Diamond tool;
25.EXPLOITING THE SECOND LAW IN WEAKLY NON-LOCAL CONTINUUM PHYSICS

机译：EXPLOITING THE SECOND LAW IN WEAKLY NON-LOCAL CONTINUUM PHYSICS
- 作者：Peter VAN
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2005年第1期
- Weakly non-load;
- Liu's procedure;
- Ginzburg-Landau equation;
- Non-equilibrium thermodynamics;
26.Friction Effects on Stability of a Digitally Controlled Pendulum

机译：Friction Effects on Stability of a Digitally Controlled Pendulum
- 作者：Csaba Budai;Laszlo L. Kovacs
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2015年第4期
- Digital position control;
- Friction effects;
- Stability;
27.Study of Screws for Femoral Neck Fixing, Using Finite Element Calculation and In-Vitro Testing

机译：Study of Screws for Femoral Neck Fixing, Using Finite Element Calculation and In-Vitro Testing
- 作者：Istvan Bagi;Sandor Olasz
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2015年第4期
- Fracture of the neck of the femur;
- Fixation with screws;
- Shape of thread;
- Duplex screw;
28.Performance, Combustion and Emission Characteristics of a D.I. Diesel Engine Fuelled with Nanoparticle Blended Jatropha Biodiesel

机译：Performance, Combustion and Emission Characteristics of a D.I. Diesel Engine Fuelled with Nanoparticle Blended Jatropha Biodiesel
- 作者：Prabu Arockiasamy;Ramachandran Bhagavathiammal Anand
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2015年第4期
- Alumina;
- Cerium oxide;
- Nanoparticle;
- Carbon monoxide;
- Unburned hydrocarbon;
29.Methods for solving a semi-differential vibration equation

机译：Methods for solving a semi-differential vibration equation
- 作者：Attila Palfalvi
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2007年第2期
- Vibration;
- Fractional derivative;
- Fractional differential equation;
30.A SEMI-EMPIRICAL MODEL FOR CHARACTERISATION OF FLOW COEFFICIENT FOR PNEUMATIC SOLENOID VALVES

机译：A SEMI-EMPIRICAL MODEL FOR CHARACTERISATION OF FLOW COEFFICIENT FOR PNEUMATIC SOLENOID VALVES
- 作者：Viktor SZENTE;Janos VAD
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2003年第2期
- Pneumatic valve;
- Flow coefficient;
- Computational fluid dynamics;
31.DESIGN TASKS SCHEDULING USING GENETIC ALGORITHMS

机译：DESIGN TASKS SCHEDULING USING GENETIC ALGORITHMS
- 作者：Tamas RICK;Mark HORVATH;Tibor BERCSEY
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2006年第1期
- Product development process;
- Genetic algorithm (GA);
- Design structure matrix (DSM);
- Task scheduling;
- Learning rate;
32.Some notes on modelling and intrinsic geometry of K-patches

机译：Some notes on modelling and intrinsic geometry of K-patches
- 作者：Daniela Velichova
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2001年第2期
- Projective geometry;
- K-patch;
- Geometric transformations;
- Modelling;
33.Effect of the Fins Length for the Passive Cooling of the Photovoltaic Panels

机译：Effect of the Fins Length for the Passive Cooling of the Photovoltaic Panels
- 作者：Taieb Nehari;Mohamed Benlakam;Driss Nehari
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2016年第2期
- PCM;
- Natural convection;
- Cooling PV panel;
34.Water purification of arsenic-contaminated drinking water via air gap membrane distillation (AGMD)

机译：Water purification of arsenic-contaminated drinking water via air gap membrane distillation (AGMD)
- 作者：Ershad Ullah Khan;Andrew R. Martin
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2014年第1期
- Arsenic removal;
- Air gap membrane distillation (AGMD);
- Internal heat recovery;
- MD performance;
35.End-plate for noise-by-flow control in axial fans

机译：End-plate for noise-by-flow control in axial fans
- 作者：Alessandro Corsini;Anthony G. Sheard
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2013年第2期
- Passive noise control;
- End-plates;
- Tip leakage-vortex break-down;
- Axial fans;
36.Hydraulic parameters of preotation controlled pumps

机译：Hydraulic parameters of preotation controlled pumps
- 作者：Janos Csemniczky
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2013年第2期
- Controls of pump;
- Prerotation control;
- Inlet guide vanes for pump;
37.Frictional Contact Finite Element Analysis of Pneumatic Cylinders

机译：Frictional Contact Finite Element Analysis of Pneumatic Cylinders
- 作者：Szandra Eva Miko
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2016年第1期
- Friction;
- Finite element method (FEM);
- Pneumatic cylinder;
- Hyperelastic material model;
38.Effect of leaser treatment on the surface of cast iron cylinder bores

机译：Effect of leaser treatment on the surface of cast iron cylinder bores
- 作者：Kornel Majlinger;Peter J. Szabo
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2010年第2期
- Laser surface treatment;
- Cast iron;
- Cylinder bore;
- Focused ion beam;
- Nanoindentation;
39.Strength rehabilitation of a pipeline system at the critical point by mechanical preloading

机译：Strength rehabilitation of a pipeline system at the critical point by mechanical preloading
- 作者：Pal Elesztos;Stefan Benca
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2007年第2期
- Buried Pipeline System;
- Mechanical Preloading;
- Strength Rehabilitation;
- FEM Analysis;
40.COMPARISON OF SOME DATA REDUCTION SCHEMES FOR COMPOSITE DELAMINATION SPECIMENS

机译：COMPARISON OF SOME DATA REDUCTION SCHEMES FOR COMPOSITE DELAMINATION SPECIMENS
- 作者：Andras SZEKRENYES
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2004年第2期
- Beam theory;
- Strain energy release rate;
- Mode ratio;
- Delamination;
41.Fast encryption of various types of messages

机译：Fast encryption of various types of messages
- 作者：Igor Erosh;Mikhail Sergeev
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2007年第1期
- Transferring messages;
- Important fragments;
- Encryption;
- Decryption;
42.Investigation of inner contact and friction conditions of a spherical roller bearing using multi-body simulation

机译：Investigation of inner contact and friction conditions of a spherical roller bearing using multi-body simulation
- 作者：Sylvain Fiedler;Timo Kiekbusch;Bernd Sauer
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2011年第2期
- Spherical roller bearing;
- Friction torque;
- MBS;
- Roller bearing test rig;
43.INVESTIGATION OF PORE SIZE AND RESIN ABSORBENCY IN CHOPPED STRAND MATS

机译：INVESTIGATION OF PORE SIZE AND RESIN ABSORBENCY IN CHOPPED STRAND MATS
- 作者：Zoltan GOMBOS;Veronika NAGY;Laszlo Mihaly VASJanos GAAL
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2005年第2期
- Glass fiber mat;
- Resin absorbency;
44.Characterization of poly(hydroxybutyrate-co-hydroxyvalerate)/Sisal Fiber/Clay bio-composites Prepared by Casting Technique

机译：Characterization of poly(hydroxybutyrate-co-hydroxyvalerate)/Sisal Fiber/Clay bio-composites Prepared by Casting Technique
- 作者：Jiratti Tengsuthiwat;Pawinee Boonyasopon;Rapeephun DangtungeeSuchart Siengchin
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2016年第2期
- Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV);
- Silane;
- Solution casting;
- Sisal;
- Composite;
45.Thermal comfort investigation in Libya

机译：Thermal comfort investigation in Libya
- 作者：Adel Akair;Laszlo Banhidi
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2007年第1期
- Adaptive thermal comfort;
- Field survey;
- Free running buildings;
- Libya climate;
46.Vibration Mitigation of Shazand Railway Bridge Induced by Train Using Tuned Mass Damper (TMD)

机译：Vibration Mitigation of Shazand Railway Bridge Induced by Train Using Tuned Mass Damper (TMD)
- 作者：Reza Latifi;Reza Razani
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2015年第4期
- Shazand;
- Railway Bridge;
- Vibration;
- Tuned mass damper;
47.Analysis of worm-like locomotion

机译：Analysis of worm-like locomotion
- 作者：Zoltan Juhasz;Ambrus Zelei
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2013年第2期
- Multibody dynamics;
- Worm-like robot;
- Autonomous locomotion;
- Undulatory locomotion;
- Parameter optimization;
48.Validation of a Discrete Model for Flow Distribution in Dividing-Flow Manifolds: Numerical and Experimental Studies

机译：Validation of a Discrete Model for Flow Distribution in Dividing-Flow Manifolds: Numerical and Experimental Studies
- 作者：Andras Tomor;Gergely Kristof
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2016年第1期
- CFD;
- Discrete model;
- Dividing-flow manifold;
- Experimental validation;
- Flow distribution;
49.Application of bioethanol in gas turbines

机译：Application of bioethanol in gas turbines
- 作者：Viktor Jozsa
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2011年第2期
- Gas turbine;
- Renewable fuel;
- Bioethanol;
- Evaporation;
50.Investigation of average air velocity and turbulence intensity in a slot ventilated space

机译：Investigation of average air velocity and turbulence intensity in a slot ventilated space
- 作者：Robert Goda;Laszlo Banhidi
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2014年第2期
- Turbulence intensity;
- Average air velocity;
- Slot ventilated;
- Tangential air distribution system;
51.Integration method for constitutive equation of von Mises elastoplasticity with linear hardening

机译：Integration method for constitutive equation of von Mises elastoplasticity with linear hardening
- 作者：Attila Kossa
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2007年第2期
- Elastoplasticity;
- Combined hardening;
- Exact integration;
52.Dynamical investigation of a linear motor to be used in cellular phones

机译：Dynamical investigation of a linear motor to be used in cellular phones
- 作者：Attila Lukacs;Zsolt Szabo
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2007年第2期
- Electromagnetic actuator;
- Vibrating alert;
- Forced Duffing equation;
53.Analysis of Particle Swarm-Aided Power Plant Optimization

机译：Analysis of Particle Swarm-Aided Power Plant Optimization
- 作者：Axel Groniewsky
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2015年第4期
54.Wear simulation of a reciprocating seal by global remeshing

机译：Wear simulation of a reciprocating seal by global remeshing
- 作者：Nandor Bekesi;Karoly Varadi
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2010年第2期
- FEM;
- Wear simulation;
- Seal;
55.Application of prestressed transparent composite beams in fracture mechanics

机译：Application of prestressed transparent composite beams in fracture mechanics
- 作者：Andrds Szekrenyes
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2007年第2期
- Composite;
- Variable mode-mixity;
- Beam theory;
- Interlaminar fracture;
56.Hybrid dynamical approach makes FMS scheduling more effective

机译：Hybrid dynamical approach makes FMS scheduling more effective
- 作者：Janos Somlo
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2001年第2期
- Hybrid dynamical approach;
- FMS scheduling;
- Demand rate;
- Overlapping production;
- Controlled buffers;
57.NON-STATIONARY TEMPERATURE FIELD OF INFINITE CYLINDER AT CO-CURRENT CONTACT WITH LIQUID MEDIUM

机译：NON-STATIONARY TEMPERATURE FIELD OF INFINITE CYLINDER AT CO-CURRENT CONTACT WITH LIQUID MEDIUM
- 作者：Pavel ELESZTOS
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2004年第2期
- Extrusion;
- Non-stationary temperature field;
58.Thermophysical properties of porous mineral-resin composites determined by a transient measurement technique

机译：Thermophysical properties of porous mineral-resin composites determined by a transient measurement technique
- 作者：Balazs Czel;Gyula Grof
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2008年第2期
- Inverse heat conduction;
- Genetic algorithm;
- Thermal conductivity;
- Volumetric heat capacity;
- Finite difference method;
59.Aerodynamic study on straight, arc-swept and twisted stationary linear cascade blades

机译：Aerodynamic study on straight, arc-swept and twisted stationary linear cascade blades
- 作者：Gergely Rabai;Janos Vad
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2009年第1期
60.MECHANICAL PROPERTIES OF BASALT FIBRE REINFORCED PP/PA BLENDS

机译：MECHANICAL PROPERTIES OF BASALT FIBRE REINFORCED PP/PA BLENDS
- 作者：Jeno Sandor SZABO;Zoltan Kocsis;Tibor CZIGANY
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2004年第2期
- Hybrid composite;
- Basalt fibre;
- Acoustic emission;
61.Finite element analysis of stiffened plates

机译：Finite element analysis of stiffened plates
- 作者：Gabor M. Voros
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2007年第2期
- Finite element;
- Stiffener;
- Free vibration;
- Buckling load;
- Constraint torsion;
62.A method of optical roughness measurement on ultrafine metal surfaces

机译：A method of optical roughness measurement on ultrafine metal surfaces
- 作者：Imre Peczeli;Istvan Varkonyi
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2009年第1期
- Ultrafine machining;
- Surface;
- Roughness;
- Electromagnetic wave;
- Diffraction;
63.CALCULATING RADIATION TEMPERATURE ASYMMETRY BY GRAPHICALLY DETERMINING THE SHAPE FACTOR

机译：CALCULATING RADIATION TEMPERATURE ASYMMETRY BY GRAPHICALLY DETERMINING THE SHAPE FACTOR
- 作者：Laszlo BANHIDI;Ilona FROHNER
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2005年第2期
- Thermal comfort;
- Radiation temperature-asymmetry;
- Shape factor;
64.INVESTIGATION OF DUCTILE FRACTURE OF NANOSTRUCTURED AL-6082 MATERIAL

机译：INVESTIGATION OF DUCTILE FRACTURE OF NANOSTRUCTURED AL-6082 MATERIAL
- 作者：Gyorgy KRALLICS;Ahmed S. M. AGENA
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2006年第2期
- Nanostructured Al-6082 alloy;
- Upsetting test;
- Ductile fracture criteria;
65.NON-CLASSICAL REVERSE ENGINEERING CONCEPT BASED ON MACHINING FEATURE RECOGNITION

机译：NON-CLASSICAL REVERSE ENGINEERING CONCEPT BASED ON MACHINING FEATURE RECOGNITION
- 作者：Attila FRIEDRICH;Gyula MATYASI
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2006年第2期
- Reverse engineering;
- Feature recognition;
- Feature technology;
66.Design of a universal robot controller

机译：Design of a universal robot controller
- 作者：Bence Kovacs;Geza Szayer;Ferenc Tajti
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2011年第2期
- Robot control;
- RT middleware;
67.Development of discrete element simulation method of vegetable oil press

机译：Development of discrete element simulation method of vegetable oil press
- 作者：Bernat Foldesi;Janos Peter Radics;Kornel TamasIstvan J. Jori
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2011年第2期
- Oil press;
- DEM simulation;
- Heat evolution;
- Granular material;
68.Comparable Research of Energy and Ecology Parameters of 1st, 2nd and 3rd Generation Biofuels for Compression Ignition Engines

机译：Comparable Research of Energy and Ecology Parameters of 1st, 2nd and 3rd Generation Biofuels for Compression Ignition Engines
- 作者：Justas Zaglinskis
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2015年第4期
- Diesel engine;
- Rapeseed biodiesel;
- Camelina sativa biodiesel;
- Algae biodiesel;
- Butanol;
- Butyl ester;
69.The amount of extractable heat with single U-tube in the function of time

机译：The amount of extractable heat with single U-tube in the function of time
- 作者：Laszlo Garbai;Szabolcs Mehes
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2008年第2期
- Heat pump;
- U-tube;
- Heat transfer;
- Heat flow;
- Thermal resistance;
70.Requirements of the gas engines considering the use of biogases

机译：Requirements of the gas engines considering the use of biogases
- 作者：Attila Meggyes;Valeria Nagy
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2009年第1期
- Biogases;
- Gas engines;
- Working range;
- Efficiency;
- Emission;
71.The compositive rational curves and their smoothness

机译：The compositive rational curves and their smoothness
- 作者：Sona Kudlickova
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2002年第1期
- Rational curve;
- Continuity constraints;
- Weight;
- Rational surface;
72.Robust Stability Limit of Delayed Dynamical Systems

机译：Robust Stability Limit of Delayed Dynamical Systems
- 作者：Daniel Bachrathy
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2015年第4期
- Robust stability;
- Multi-Dimensional Bisection Method (MDBM);
- Turning;
- Process damping;
73.Research on the Piston with Damping Hole and Pressure Recess of Axial Piston Motor

机译：Research on the Piston with Damping Hole and Pressure Recess of Axial Piston Motor
- 作者：Z. Q. Wang;L. Y. Gu;J. W. ChengY. Y. WangM. GaoX. J. Jia
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2014年第1期
- Axial piston motor;
- Hydrostatic bearing;
- Damping hole;
- Efficiency;
- Friction;
74.Modeling and optimising alternatives suitable to advance the product development process

机译：Modeling and optimising alternatives suitable to advance the product development process
- 作者：Klaudia Nagy;Judit Szalai
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2011年第2期
- Product development;
- Design structure matrix;
- Genetic algorithms;
- Neural;
75.Influence of the infiltration pressure on the properties of MMC wires

机译：Influence of the infiltration pressure on the properties of MMC wires
- 作者：Imre Kientzl;Arpad Nemeth;Janos Dobranszky
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2008年第1期
- MMC wire;
- Double composite;
- Pressure infiltration;
76.DEVELOPMENT OF MODULAR PRODUCTION LINES

机译：DEVELOPMENT OF MODULAR PRODUCTION LINES
- 作者：Viktor GOTTHARD;Tibor BERCSEY
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2006年第2期
- Modular machine family;
- Design for modularity;
- Flexible machine;
- Element-library;
77.Vibrator with DC motor driven eccentric rotors

机译：Vibrator with DC motor driven eccentric rotors
- 作者：Akos Miklos;Zsolt Szabo
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2012年第1期
- Self-synchronization;
- DC motor;
- Dual excenter;
- Vibromotor;
78.Theoretical study in single-phase forced-convection heat transfer characteristics for narrow annuli fuel coolant channels

机译：Theoretical study in single-phase forced-convection heat transfer characteristics for narrow annuli fuel coolant channels
- 作者：F. M. Bsebsu;G. Bede
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2002年第1期
- Research reactor;
- Thermal hydraulics;
- Reactor heat transfer;
- Heat transfer correlation;
- And reactor safety;
- WWR-M2 channel;
79.ESSENTIAL WORK OF FRACTURE CONCEPT IN POLYMERS

机译：ESSENTIAL WORK OF FRACTURE CONCEPT IN POLYMERS
- 作者：Tamas BARANY;Tibor CZIGANY;Jozsef KARGER-KOCSIS
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2003年第2期
- Essential work;
- Fracture mechanics;
- Infrared thermography;
- Non-essential work;
- Plastic work;
- Polyethylene terephthalate;
80.NUMERICAL ANALYSIS OF TWO DIMENSIONAL HEAT CONDUCTIVITY IN STEADY STATE REGIME

机译：NUMERICAL ANALYSIS OF TWO DIMENSIONAL HEAT CONDUCTIVITY IN STEADY STATE REGIME
- 作者：Ioan SARBU
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2005年第2期
- Finite element;
- Heat conduction;
- Mathematical model;
- Variation calculus;
81.Magnetic saturation of poly(dimethyl-siloxane) matrix composites based magnetorheological elastomers

机译：Magnetic saturation of poly(dimethyl-siloxane) matrix composites based magnetorheological elastomers
- 作者：Jozsef Csizmadia;Istvan Meszaros
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2008年第1期
- Saturation magnetisation;
- Magnetic materials;
- Material testing;
- VSM;
82.Energetical optimization of water distribution systems in large urban centers

机译：Energetical optimization of water distribution systems in large urban centers
- 作者：Ioan Sarbu;Gabriel Ostafe
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2008年第2期
83.RELATIONSHIP BETWEEN THE TENSILE AND STRESS RELAXATION BEHAVIOUR OF POLYPROPYLENE

机译：RELATIONSHIP BETWEEN THE TENSILE AND STRESS RELAXATION BEHAVIOUR OF POLYPROPYLENE
- 作者：Laszlo M. VAS;Peter NAGY
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2006年第2期
- Stress relaxation;
- Tensile test;
- Polypropylene;
84.Kinematics and stiffness of a planar tensegrity parallel mechanism

机译：Kinematics and stiffness of a planar tensegrity parallel mechanism
- 作者：Zhifei Ji;Tuanjie Li;Min Lin
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2014年第2期
- Tensegrity;
- Static analysis;
- Kinematics;
- Stiffness;
- Mechanisms;
85.Elastic Analysis of Rotating Thick Cylindrical Pressure Vessels under Non-Uniform Pressure: Linear and Non-Linear Thickness

机译：Elastic Analysis of Rotating Thick Cylindrical Pressure Vessels under Non-Uniform Pressure: Linear and Non-Linear Thickness
- 作者：Mohammad Zamani Nejad;Mehdi Jabbari;Mehdi Ghannad
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2015年第4期
- Rotating thick cylindrical shell;
- Variable thickness;
- Hyperbolic profile;
- Non-uniform pressure;
- Multi-layers method (MLM);
86.DESIGN DEVELOPMENT AND TRIBOLOGY OF RECIPROCATING HYDRAULIC SEALS

机译：DESIGN DEVELOPMENT AND TRIBOLOGY OF RECIPROCATING HYDRAULIC SEALS
- 作者：Sandor BISZTRAY BALKU
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2004年第2期
- Tribology of reciprocating hydraulic seals;
- Piston and piston rod seals;
- Efficiency of seals;
- Design of seals;
87.BASIC EQUATIONS AND DIFFERENT APPLICATIONS (BEDA) OF CONTINUUM MECHANICS

机译：BASIC EQUATIONS AND DIFFERENT APPLICATIONS (BEDA) OF CONTINUUM MECHANICS
- 作者：Andras SZEKERES
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2004年第2期
- Continuum mechanics;
- Thermo-hygro;
- Composite;
- Second sound;
- Similarity;
88.Smelting experiments in the early medieval fajszi-type bloomery and the metallurgy of iron bloom

机译：Smelting experiments in the early medieval fajszi-type bloomery and the metallurgy of iron bloom
- 作者：Adam Thiele
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2010年第2期
- Archaeometallurgy;
- Experimental archaeology;
- Smelting experiment;
- Bloomery;
- Iron bloom;
89.HOPF BIFURCATION CALCULATIONS IN DELAYED SYSTEMS

机译：HOPF BIFURCATION CALCULATIONS IN DELAYED SYSTEMS
- 作者：Gabor OROSZ
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2004年第2期
- Delay-differential equation;
- Hopf bifurcation;
90.Producing metal matrix syntactic foams by pressure infiltration

机译：Producing metal matrix syntactic foams by pressure infiltration
- 作者：Imre Norbert Orbulov;Janos Dobranszky
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2008年第1期
- Metal matrix composite;
- Pressure infiltration;
- Metallic foam;
- Syntactic foam;
- Ceramic microballoon;
- Hollow sphere;
91.Equivalent stress for micropolar solids

机译：Equivalent stress for micropolar solids
- 作者：Akos Gombos
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2007年第2期
- Cosserat;
- Micropolar;
- Equivalent stress;
92.Numerical Modeling of an FG Plate Behavior Impacted at Low Velocity in a Temperature Field

机译：Numerical Modeling of an FG Plate Behavior Impacted at Low Velocity in a Temperature Field
- 作者：Amine Smahat;Abdelkader Megueni
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2016年第2期
- FGM plate;
- Impact;
- Contact force;
- Indentation;
- Temperature;
- Velocity;
- Index;
93.Numerical investigation of the dissolution mechanism of a freely oscillating CO_2 gas bubble by the method of lines

机译：Numerical investigation of the dissolution mechanism of a freely oscillating CO_2 gas bubble by the method of lines
- 作者：Karoly Czader;Kalman Gabor Szabo
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2013年第1期
- Soluble gas bubble;
- Free oscillation;
- Absorption;
- Rayleigh-Plesset equation;
94.Frequency and Phase Characteristics of the Edge Tone Part II.

机译：Frequency and Phase Characteristics of the Edge Tone Part II.
- 作者：Istvan Vaik;Roxana Varga;Gyorgy Paal
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2014年第1期
- Edge tone;
95.INFLUENCE OF ECAP ROUTES ON MECHANICAL PROPERTIES OF A NANOCRYSTALLINE ALUMINIUM ALLOY

机译：INFLUENCE OF ECAP ROUTES ON MECHANICAL PROPERTIES OF A NANOCRYSTALLINE ALUMINIUM ALLOY
- 作者：Gyorgy KRALLICS;Matyas HORVATH;Arpad FODOR
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2004年第2期
- Equal channel angular pressing;
- High strength and ductility;
- Nanosized microstructure;
- Surface quality;
96.PROJECTION COLOUR MOIRE TECHNIQUE FOR 3-D SURFACE RECONSTRUCTION

机译：PROJECTION COLOUR MOIRE TECHNIQUE FOR 3-D SURFACE RECONSTRUCTION
- 作者：Daria PAVELEVA;Akos ANTAL
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2006年第2期
- Moire phenomenon;
- Problem of ambiguities;
- Projection technique;
97.Relationship between the kink and the structure of the guidewire

机译：Relationship between the kink and the structure of the guidewire
- 作者：Peter Nagy;Liza Pelyhe
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2013年第1期
- Guidewire;
- Kink;
- Structural investigation;
- Structure;
- Tip style;
98.Thermal FE analysis of a one side brake block test equipment (Part 2)

机译：Thermal FE analysis of a one side brake block test equipment (Part 2)
- 作者：Gabor Fekete;Karoly Varadi
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2013年第1期
- FEM;
- Railway brake block;
- Heat load;
- Heat expansion;
- Opening;
99.Experimental Model for the Main Cutting Force in Face Milling of a High Strength Structural Steel

机译：Experimental Model for the Main Cutting Force in Face Milling of a High Strength Structural Steel
- 作者：Istvan Biro;Miklos Czampa;Tibor Szalay
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2015年第4期
- Cutting speed;
- Specific cutting force;
- Main cutting force;
- Face milling;
100.Emissions at airports and their impact at the habitat

机译：Emissions at airports and their impact at the habitat
- 作者：Michael Palocz-Andresen
- 期刊名称：《Periodica Polytechnica. Mechanical Engineering》 | 2009年第1期

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号