Effect of Warm Rolling on the Corrosion and Mechanical Properties of UNS S32205 Duplex Stainless Steel

摘要

Duplex stainless steel (DSS) has been considered as an excellent alternative for applications where high corrosion resistance and high mechanical strength are required. Therefore, microstructure and properties of DSS remain topics of much interest. For this purpose, the effect of warm-rolling was studied in a duplex stainless steel. The focus of this work was 2205 which is one of the most useful type of DSS. Although evolution of microstructure, texture and tensile properties during warm rolling of DDS have been reported, there is no study on the effect of warm rolling on corrosion resistance of 2205 DSS. In this context, the objective of this work is to evaluate microstructure, texture and mechanical and corrosion properties of UNS S32205 DSS after warm rolling. The duplex stainless steel was warm-rolled at 600°C up to 60 and 80% thickness reduction and submitted to electrochemical tests. The electrochemical behaviour of warm-rolled 2205 in the chlorine ion environment was evaluated using cyclic potentiodynamic polarization (CPP) and electrochemical impedance spectroscopy (EIS). The samples exhibited an excellent corrosion resistance in 3.5% NaCl solution. The study showed that the thermomechanical treatment used favoured the formation of the passive film and led to a greater polarization resistance. This behaviour is consistent with the pits density observed by scanning electron microscopy (SEM) and the crystallographic microtexture of the steel.