Selection and optimization of a suitable pretreatment method for miscanthus and poplar raw material

摘要

Miscanthus and poplar are very promising second‐generation feedstocks due to the high growth rates and low nutrient demand. The aim of the study was to develop a systematic approach for choosing suitable pretreatment methods evaluated with the modified severity factor (log ). Optimal pretreatment results in a high delignification grade, low cellulose solubilization and increased accessibility for enzymatic hydrolysis while revealing minimal log values. In order to do so, several reaction approaches were compared. Acid‐catalyzed organosolv processing carried out for miscanthus and poplar revealed the highest delignification grade leading to a relatively high glucose yield after enzymatic saccharification. In both cases, a design of experiments approach was used to study the influence of relevant parameters. Modeling the data resulted in the identification of optimum pretreatment conditions for miscanthus with concentrations of 0.16% Hsub2/subSOsub4/sub and 50% EtOH at 185°C for a retention time of 60?min. Experimental validation of these conditions revealed an even higher delignification degree (88%) and glucose yield (85%) than predicted. 0.19% Hsub2/subSOsub4/sub and 50% EtOH were determined as optimum concentrations, 182°C and 48?min identified as optimum pretreatment conditions for poplar; the delignification degree was 84% and the resulting glucose yield 70%.