首页> 外文期刊>Energy Science & Engineering >Nanoscale pore structure and fractal characteristics of the continental Yanchang Formation Chang 7 shale in the southwestern Ordos Basin, central China
【24h】

Nanoscale pore structure and fractal characteristics of the continental Yanchang Formation Chang 7 shale in the southwestern Ordos Basin, central China

机译:南部鄂尔多斯盆地西南部延长地区延长孔隙结构和分形特征,鄂尔多斯盆地中部

获取原文
           

摘要

Shales from the Yanchang Formation Chang 7 Member in the Ordos Basin are among the most important shale reservoirs in China and have been investigated due to their great potential. Knowledge of pore structure is important for understanding the storage capacity and flow mechanism in shale reservoirs. In this study, eight shale samples were collected from the Yanchang Formation Chang 7 Member in the southwestern Ordos Basin, and their geochemistry, mineral compositions, pore structure, and fractal characteristics were investigated based on X‐ray diffraction (XRD) analysis, total organic carbon (TOC) analysis, low‐pressure adsorption/desorption analysis, thermal maturity analysis, and fractal analysis. The results indicated that the TOC content ranged between 0.48% and 2.37%, and the Ro values varied from 0.826% to 1.217%. The major mineral compositions were quartz and clay minerals. Nitrogen adsorption/desorption analysis indicated that the isotherms were similar for all collected shale samples from the Chang 7 Member and resembled the type IV isotherm. Narrow slit‐like pore was the dominant pore type, and the pore size distribution appeared to be unimodal with its peak mainly around 40?nm. Investigation of factors for pore structures showed that the TOC content was the controlling factor for the Chang 7 shales. The Frenkel‐Halsey‐Hill (FHH) method was applied to determine fractal dimensions, which were calculated as the D1 (relative pressure 0.96), D2 (0.96 relative pressure 0.45), and D3 (0.45 relative pressure) values, ranging in the intervals of 2.788~2.854, 2.547~2.688, and 2.410~2.567, respectively. The relatively high fractal dimensions indicated that pore structures were complicated, and the higher D1 values suggested that pores with larger sizes showed a rougher pore surface and more complex pore structure. Fractal dimensions showed positive correlations with the contents of TOC and clay minerals, and a negative relationship with the quartz contents.
机译:鄂尔多斯盆地延长地层张7会员的张7会员是中国最重要的页岩水库之一,并且由于其巨大的潜力而被调查。孔隙结构的知识对于了解页岩储层中的存储容量和流量机制非常重要。在这项研究中,从鄂尔多斯盆地延长地层张7成员收集了八个页岩样品,以及其地球化学,矿物组合物,孔隙结构和分形特征,基于X射线衍射(XRD)分析,总有机碳(TOC)分析,低压吸附/解吸分析,热成熟度分析和分形分析。结果表明,TOC含量范围为0.48%至2.37%,RO值不同于0.826%至1.217%。主要的矿物质组合物是石英和粘土矿物质。氮吸附/解吸分析表明,对于来自Chanc 7构件的所有收集的页岩样品,等温物质类似,并且类似于IV型等温物。狭窄的狭缝孔隙是主要的孔型,孔径分布似乎是单峰的,其峰值主要是约40μm。孔隙结构因素的调查显示,TOC含量是Chang 7 Hales的控制因素。施用Frenkel-Halsey-hill(FHH)方法以确定分形尺寸,计算为D1(相对压力> 0.96),D2(0.96>相对压力> 0.45)和D3(0.45>相对压力)值,间隔为2.788〜2.854,2.547〜2.688和2.410〜2.567的间隔。相对较高的分形尺寸表明孔结构复杂,并且越高的D1值表明具有较大尺寸的孔显示出令人讨厌的孔表面和更复杂的孔结构。分形尺寸与TOC和粘土矿物质的含量显示阳性相关性,以及与石英含量的负面关系。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号