首页> 外文期刊>International Journal of Engineering Research and Applications >Design and FPGA Prototyping of Embedded Ethernet Controller
【24h】

Design and FPGA Prototyping of Embedded Ethernet Controller

机译:嵌入式以太网控制器的设计和FPGA原型设计

获取原文
           

摘要

Presently, the embedded system, which was composed of SOC, entered into people's life more and more widely. We can see it frequently whether in the mobile phones, television, industrial control equipment or network devices. With the continuous expansion of network scale and the increase of service, the embedded Internet has played an increasingly important role. Ethernet is the most w idely used LAN technology in the present day world. With the increasing use of embedded systems, the need for incorporating Ethernet connectivity into the embedded systems is greatly felt. Therefore, the study of Ethernet communication on embedded system is necessary. The embedded Ethernet is widely applied, and its research is very important. In this paper a 10/100 Mbps embedded ethernet controller has been developed in Verilog-HDL, that can support tw o speeds (10/100Mbps), two modes (full/half duplex), and can communicate with PHY through MII. The Ethernet controller designed conforms to the standards of IEEE 80 2.3 communication protocol. The simulation has been done using ModelSim6.4SE. FPGA Prototyping w as done using Xilinx EDK tool on Xilinx Virtex-5FX70T FPGA. The packet capture has been done using Wireshark tool
机译:目前,由SOC组成的嵌入式系统越来越广泛地进入人们的生活。我们经常在手机,电视,工业控制设备或网络设备中看到它。随着网络规模的不断扩大和服务的增加,嵌入式Internet发挥了越来越重要的作用。以太网是当今世界上使用最广泛的LAN技术。随着嵌入式系统使用的增加,人们非常需要将以太网连接纳入嵌入式系统。因此,有必要对嵌入式系统的以太网通信进行研究。嵌入式以太网被广泛应用,其研究非常重要。本文在Verilog-HDL中开发了10/100 Mbps嵌入式以太网控制器,该控制器可以支持两种速度(10 / 100Mbps),两种模式(全双工/半双工),并且可以通过MII与PHY通信。设计的以太网控制器符合IEEE 80 2.3通信协议的标准。仿真是使用ModelSim6.4SE完成的。使用Xilinx Virtex-5FX70T FPGA上的Xilinx EDK工具进行的FPGA原型开发。数据包捕获已使用Wireshark工具完成

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号