首页> 外文期刊>Journal of Theoretical and Applied Information Technology >DESIGN OF LOW-POWER ADDER USING DOUBLE GATE & MTCMOS TECHNOLOGY
【24h】

DESIGN OF LOW-POWER ADDER USING DOUBLE GATE & MTCMOS TECHNOLOGY

机译:利用双门和MTCMOS技术设计低功耗放大器

获取原文
           

摘要

Low power, high speed Dynamic adders is widely used in Digital Logic Designs to overcome the leakage power and speed issues in static adders. Hence, by using MTCMOS Technology, low power dynamic MTCMOS 8-Bit full-adder cells have been proposed. Eight bit MTCMOS adder circuit has been designed using 45nm CMOS Technology. The static Adder circuit is modified by adding an NMOS transistor as a footer or tail to the circuit. This tail transistor when operates in sleep mode, it cuts off the path of current flow from Rail to Rail, which results in leakage power reduction. Hence, the proposed double-gate, MTCMOS Technology dynamic adders are significantly faster as compared to static CMOS logic designs in two aspects reduction of delay when tail transistor operates in normal mode and reduction of leakage power when tail transistor operates in sleep mode. Design analyses, and comparison results verify that the proposed circuits operate with high speed, obtains a significant reduction in leakage power due to the tail transistor included in the circuit. It is also observed that the power consumption of proposed dynamic adder is significantly less compared to existing static adders.
机译:低功耗,高速动态加法器广泛用于数字逻辑设计中,以克服静态加法器中的泄漏功率和速度问题。因此,通过使用MTCMOS技术,已经提出了低功率动态MTCMOS 8位全加器单元。采用45nm CMOS技术设计了八位MTCMOS加法器电路。通过将NMOS晶体管作为页脚或尾部添加到电路中,可以修改静态加法器电路。该尾晶体管在睡眠模式下工作时,它切断了电流从导轨到导轨的流动路径,从而降低了泄漏功率。因此,与静态CMOS逻辑设计相比,拟议的双栅极MTCMOS技术动态加法器在两个方面都显着更快:在减少尾部晶体管在正常模式下工作时的延迟和减少尾部晶体管在睡眠模式下工作时的泄漏功率。设计分析和比较结果验证了所提出的电路以高速运行,由于电路中包含尾晶体管,从而显着降低了泄漏功率。还观察到,与现有的静态加法器相比,提出的动态加法器的功耗明显更少。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号