首页> 外文期刊>Journal of nuclear science and technology >Analytical Study of Thermo-Hydrodynamic Behavior of Reflood-Phase during LOCA
【24h】

Analytical Study of Thermo-Hydrodynamic Behavior of Reflood-Phase during LOCA

机译:LOCA期间回水相热力学行为的分析研究

获取原文
           

摘要

The objective of this study is the establishment of the thermo-hydrodynamic model of the reactor core during reflood phase of LOCA.Based on the quench model proposed by the author, and assuming a reflood model including a flow model and a set of the thermo-hydrodynamic correlations, a reflood an-alysis code named "REFLA-1D" was developed.Considerably close agreement between PWR-FLECHT tests and the results calculated by REFLA-1D code for the critical Weber number Wec=1 was obtained for fuel clad temperature histories and the quench time and the quench temperature except for the quenching from the top of the fuel rod. It was found that the errors of calculated quench time and temperature are within ±20% under the following conditions: (1) pressure 4.51.5kg/cm2?a or core inlet velocity 154.8 cm/s, (2) inlet subcooling more than 30°C. In the transition flow region, the calculated tendency of the temperature histories is different from the measured. This reflood model appears to be reasonable but some modifications on the low flooding quench model and the transition flow are necessary.
机译:这项研究的目的是建立LOCA驱替阶段反应堆堆芯的热流体动力学模型。基于作者提出的淬火模型,并假设一个包括流动模型和一组热力模型的驱替模型。流体动力学相关性,开发了一个称为“ REFLA-1D”的再分析分析代码。PWR-FLECHT测试与通过REFLA-1D代码计算的关键韦伯数Wec = 1的结果在燃料包覆温度历史上相当接近以及淬火时间和淬火温度(除了从燃料棒顶部淬火)。发现在以下条件下,淬火时间和温度的计算误差在±20%以内:(1)压力4.51.5kg / cm2?a或堆芯入口速度154.8 cm / s,(2)入口过冷超过30 ℃。在过渡流动区域中,计算的温度历史趋势与实测值不同。该驱油模型似乎是合理的,但需要对低驱油淬火模型和过渡流进行一些修改。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号