Effects of surface treatments on repair bond strength of a new CAD/CAM ZLS glass ceramic and two different types of CAD/CAM ceramics

摘要

We evaluated the effects of three different surface treatments and two different bonding procedures on shear bond strength of resin composites to different computer-aided design/manufacturing (CAD/CAM) ceramics with or without thermocycling. The test specimens were prepared from three different CAD/CAM ceramics (Group A, IPS e.max CAD; Group B, IPS e.max ZirCAD; Group C, Vita Suprinity). They were divided into eight subgroups according to the surface treatment and bonding procedures. After resin composite was applied to the surfaces of all test specimens, they were stored in distilled water for 24 h at 37°C. Next, half of the test specimens were subjected to a thermocycling procedure, and the other half were stored in distilled water at 37°C throughout thermocycling. The shear bond strength was performed using a universal testing machine. Statistical analysis revealed that the ceramic types ( P > 0.0031) and thermocycling ( P > 0.0021) did not, but the surface treatment technique did significantly affect the shear bond strength values ( P.