In order to improve the surface quality and formability of 3003 aluminum alloy sheet, laser-textured rolls are used in cold rolling. The influences of the cold rolling procedures with conventional and laser-textured rolls on the evolution of microstructure and texture were studied by the means of microstructural observations and X-ray texture analysis. Experimental results show that the microstructures are similar besides the samples rolled with laser-textured rolls containing a relatively larger amount of shear bands. The sheets deformed with conventional rolls have developed the typical rolling textures of FCC metals, which consist of Bs, Cu, and S components. However, the rolling textures of the sheets rolled with laser-textured rolls are comparatively weak, and the shear texture{001}〈110〉is developed on the surface layer, but not observed in the intermediate layer of the sheet. The intensity of the rotated cube orientation increases with the increase of rolling reduction and then decreases after 90% rolling reduction.
展开▼
