首页> 外文期刊>Journal of Medical Case Reports >Two-year follow-up of revision total hip arthroplasty using a ceramic revision head with a retained well-fixed femoral component: a case series
【24h】

Two-year follow-up of revision total hip arthroplasty using a ceramic revision head with a retained well-fixed femoral component: a case series

机译:使用保留了固定良好股骨成分的陶瓷翻修头进行翻修全髋关节置换术的两年随访:病例系列

获取原文
           

摘要

Introduction It is known that a well-fixed stem can be left in situ when only the acetabular component and femoral head have to be changed. However, in a revision case, the use of a ceramic head on an existing taper is not recommended. Slight damages of the taper may increase the risk of a ceramic fracture. Until now in a revision case a primary ceramic-on-ceramic or ceramic-on-polyethylene pairing was changed to a metal-on-polyethylene pairing or the well-fixed stem was removed as well. During the past several years, a ceramic head with a metallic sleeve has been introduced as an option for revisions with a stem left in situ. We report short-term results of a ceramic revision head in this clinical setting. Methods Eight patients with a ceramic revision head were clinically and radiologically followed up two years after revision surgery. Their Harris Hip Score and visual analogue scale scores for pain and satisfaction were recorded, and their radiographs were checked for osteolysis and heterotopic ossifications. Results The mean Harris Hip Score increased from 46.5 points before surgery to 88.3 points 2 years after surgery. The mean visual analogue scale score for pain improved from 6.7 to 1.1, and the mean visual analogue scale for satisfaction rose from 5.1 to 8.3. The radiological results did not show osteolysis in any of the patients. Grade I heterotopic ossification according to the Brooker classification system was seen in one patient. Conclusions The early clinical and radiological results in this case series are in agreement with previously published studies. Ceramic revision heads with a metallic sleeve are a promising approach in the revision of a ceramic head with a well-fixed stem which can be left in situ. This solution avoids an unnecessary exchange of a well-fixed stem and thereby shortens the surgical time of the revision and may reduce the peri-operative complications.
机译:简介众所周知,仅需更换髋臼组件和股骨头时,可以将固定好的茎留在原处。但是,在改型的情况下,不建议在现有锥度上使用陶瓷头。锥度的轻微损坏可能会增加陶瓷破裂的风险。直到现在,在修订案例中,主要的陶瓷对陶瓷或聚乙烯对陶瓷的配对已更改为聚乙烯对金属配对,或者也移除了固定良好的阀杆。在过去的几年中,引入了带有金属套筒的陶瓷头作为原位保留阀杆的改型选择。我们在此临床环境中报告了陶瓷翻修头的短期结果。方法对8例陶瓷翻修头患者进行翻修手术后两年的临床和放射学随访。记录他们的哈里斯臀部评分和视觉模拟量表评分,以评估他们的疼痛和满意度,并检查他们的X射线照片是否存在骨溶解和异位骨化。结果Harris髋关节平均评分从术前的46.5分提高到术后2年的88.3分。疼痛的平均视觉模拟量表评分从6.7改善到1.1,满意度的平均视觉模拟量表评分从5.1改善到8.3。放射学结果未显示任何患者发生骨溶解。一名患者出现了根据Brooker分类系统进行的I级异位骨化。结论该病例系列的早期临床和放射学结果与先前发表的研究一致。带有金属套筒的陶瓷翻修头是对具有固定杆的陶瓷头进行翻修的一种有前途的方法,该杆可以留在原地。该解决方案避免了不必要地更换固定良好的茎,从而缩短了翻修手术的时间,并可以减少围手术期并发症。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号