This paper presents the automatic system for the processing of the signals from the frequency modulated interrupted continuous wave (FMICW) radar and describes methods for the primary signal processing. Further, we present methods for the detection of the targets in strong noise. These methods are tested both on the real and simulated signals. The real signals were measured using the developed at the IAP CAS experimental prototype of FMICW radar with operational frequency 35.4 GHz. The measurement campaign took place at the TU Delft, the Netherlands. The obtained results were used for development of the system for the automatic detection and analysis of the targets measured by the FMICW radar.
展开▼
机译:本文介绍了一种自动系统,用于处理来自调频间断连续波(FMICW)雷达的信号,并介绍了用于主信号处理的方法。此外,我们提出了在强噪声中检测目标的方法。这些方法都在真实和模拟信号上进行了测试。使用在IAP CAS FMICW雷达实验原型上开发的,工作频率为35.4 GHz的信号来测量真实信号。测量活动在荷兰的代尔夫特理工大学举行。获得的结果用于开发系统,用于自动检测和分析FMICW雷达测得的目标。
展开▼