Numerical Study of Being Forced Leather Cap Type Pig in Straight Gas Pipeline

摘要

The research on pipeline pigging technology is significant for the operation and management of pipeline. Domestic and foreign scholars usually research the operation rules of pigging in oil pipeline. There are few studies about gas pipeline pigging running because of running rate. The author established the force calculating model and corresponding numerical methods of leather cap type pig in gas pipeline. The model is based on geometric model of oil pipeline pigging. Combining pigging operation parameters with records in September 2013 and February 2014 at Bei Neihuan, the thesis used mathematical method and finite element software respectively to verify the mathematical model. The mathematical results described the average force of cup. The results indicated that the reason of the breaking of the cup is the force, instead of the cup material, temperament extrinsic reasons, etc. The force is larger than the tensile strength of the cup. The results of ANSYS finite element software simulation described the force of different parts of the cup. It is found that the force exceeding of the cup anti-pull force strength in the upper and lower sides of the cup is larger. Both results showed that using the mathematical model can quickly calculate cup pigging force conditions and determine the cause of damage to the cup. It can improve the efficiency of pigging.