...
首页> 外文期刊>Shock and vibration >Free and Forced Vibrations of an Axially-Loaded Timoshenko Multi-Span Beam Carrying a Number of Various Concentrated Elements
【24h】

Free and Forced Vibrations of an Axially-Loaded Timoshenko Multi-Span Beam Carrying a Number of Various Concentrated Elements

机译:轴向载荷的Timoshenko多跨梁承载多种集中元件的自由振动和强迫振动

获取原文

摘要

In the existing reports regarding free and forced vibrations of the beams, most of them studied a uniform beam carrying various concentrated elements using Bernoulli-Euler Beam Theory (BET) but without axial force. The purpose of this paper is to utilize the numerical assembly technique to determine the exact frequency-response amplitudes of the axially-loaded Timoshenko multi-span beam carrying a number of various concentrated elements (including point masses, rotary inertias, linear springs and rotational springs) and subjected to a harmonic concentrated force and the exact natural frequencies and mode shapes of the beam for the free vibration analysis. The model allows analyzing the influence of the shear and axial force and harmonic concentrated force effects and intermediate concentrated elements on the dynamic behavior of the beams by using Timoshenko Beam Theory (TBT). At first, the coefficient matrices for the intermediate concentrated elements, an intermediate pinned support, applied harmonic force, left-end support and right-end support of Timoshenko beam are derived. After the derivation of the coefficient matrices, the numerical assembly technique is used to establish the overall coefficient matrix for the whole vibrating system. Finally, solving the equations associated with the last overall coefficient matrix one determines the exact dynamic response amplitudes of the forced vibrating system corresponding to each specified exciting frequency of the harmonic force. Equating the determinant of the overall coefficient matrix to zero one determines the natural frequencies of the free vibrating system (the case of zero harmonic force) and substituting the corresponding values of integration constants into the related eigenfunctions one determines the associated mode shapes. The calculated vibration amplitudes of the forced vibrating systems and the natural frequencies of the free vibrating systems are given in tables for different values of the axial force. The dynamic response amplitudes and the mode shapes are presented in graphs. The effects of axial force and harmonic concentrated force on the vibration analysis of Timoshenko multi-span beam are also investigated.
机译:在有关梁自由振动和强迫振动的现有报告中,他们中的大多数使用伯努利-欧拉梁理论(BET)研究了承载各种集中元素的均匀梁,但没有轴向力。本文的目的是利用数值组装技术来确定轴向载荷的蒂莫申科多跨梁的精确频率响应幅度,该梁承载许多不同的集中元素(包括点质量,旋转惯性,线性弹簧和旋转弹簧) )并受到谐波集中力以及梁的固有固有频率和模态形状的影响,以进行自由振动分析。该模型允许使用Timoshenko梁理论(TBT)分析剪力和轴向力以及谐波集中力效应和中间集中元素对梁动力特性的影响。首先,推导了中间集中单元,中间钉固支座,施加的谐波力,蒂莫申科梁的左端支座和右端支座的系数矩阵。推导系数矩阵后,使用数值组装技术建立整个振动系统的整体系数矩阵。最后,通过求解与最后一个总系数矩阵相关的方程,可以确定与每个谐波力的指定激励频率相对应的强制振动系统的确切动态响应幅度。将整个系数矩阵的行列式均等为零,即可确定自由振动系统的固有频率(零谐波力的情况),并将积分常数的相应值代入相关的本征函数中,即可确定相关的模态。对于轴向力的不同值,表中给出了计算得出的强迫振动系统的振动幅度和自由振动系统的固有频率。动态响应幅度和模式形状以图形表示。还研究了轴向力和谐波集中力对Timoshenko多跨梁振动分析的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号