Influence of various structural factors of claw pole transverse flux permanent magnet machines on internal voltage using finite element analysis

摘要

This paper presents the influence of several structural factors and parameters involved in the design of Claw Pole Transvers Flux Permanent Magnet Machines (TFPMs) on their internal voltage. Knowing the influence of each factor is very important for an effective process of design and optimization for these machines. In this paper by using the complete design algorithm of Claw Pole TFPM, only one parameter is changed at a time and its influence on the internal voltage is analyzed. Output torque is also studied, because the internal voltage has effect on both the average and the ripple of output torque. The most important factors and parameters which are considered are: 1) number of poles; 2) length of air gap; 3) ratio of magnet arc to flux concentrator arc in each pole of rotor; 4) shape of pole shoe of stator and 5) area of rotor pole covered by stator pole. Due to geometrical complexities of TFPMs, analytical methods fail to describe the behavior of these machines. For this reason, in this paper finite element analysis is used both in the design and analysis of TFPMs.