...
首页> 外文期刊>Nuclear Materials and Energy >Compositions and chemical states on the co-deposition layer of lithiated tungsten of plasma-facing components of EAST
【24h】

Compositions and chemical states on the co-deposition layer of lithiated tungsten of plasma-facing components of EAST

机译:EAST等离子体组件的锂化钨共沉积层上的成分和化学状态

获取原文

摘要

Highlights ? The chemical compositions and states of the Li-W co-deposition layer on W were determined by a post-mortem analysis of X-ray photoelectron spectroscopy (XPS) after an analysis of laser-induced breakdown spectroscopy (LIBS) approach. ? The analysis of XPS shew the observable Li 2 CO 3 XPS peaks due to a series of reaction after exposure of air on the lithiated W surface. The Li 2 CO 3 XPS peaks at 289eV and 531.6eV were obviously changed with the Li distribution. ? In addition, high proportional W oxides were formed on the surface of Li-W co-deposition layer of lithiated W. Elemental W peaks at the laser ablation spots were more obvious than them at the Li-W co-deposition layer surface without laser ablation. Abstract Lithiation is beneficial to enhance plasma performance in EAST by reducing hydrogen and impurities recycling via lithium (Li) wall conditioning. High-Z materials like tungsten (W) have been selected as up–divertor in EAST tokamak. However, the nature of the chemical compositions and states on Li-W co-deposition layer is still unclear. In this paper, pure W plasma-facing component experiments with Li deposition layer were carried out by a cascaded-arc linear plasma generator. An in-situ laser-induced breakdown spectroscopy (LIBS) system with spatial resolution about 1mm and depth resolution about 200nm was developed to real time monitor the composition and distribution on Li-W co-deposition layer. The chemical states of the co-deposition layer and laser ablation spots were determined by a post-mortem analysis of X-ray photoelectron spectroscopy (XPS). Both LIBS and XPS results shew that higher concentration of Li could be observed at the region closed to the Li source. The XPS spectra indicated that Li 2 CO 3 peaks intensities at 289eV and 531.6eV were obviously changed with the Li distribution. In addition, high proportional W oxides were formed on the surface of Li-W co-deposition layer in the lithiated W sample. Elemental W signals corresponding to the laser ablation spots were much more obvious than them in the area of Li-W co-deposition layer surface without laser ablation. This work could improve the understanding of the Li-wall conditioning for tungsten divertor in EAST tokamak.
机译:强调 ?在对激光诱导击穿光谱法(LIBS)进行分析之后,通过X射线光电子能谱(XPS)的事后分析确定W上Li-W共沉积层的化学组成和状态。 ? XPS的分析显示了可观察到的Li 2 CO 3 XPS峰,这是由于将空气暴露在锂化的W表面后发生了一系列反应。 Li 2 CO 3 XPS峰在289eV和531.6eV随Li分布而发生明显变化。 ?此外,在锂化W的Li-W共沉积层表面上形成了高比例的W氧化物。激光烧蚀点处的元素W峰比未进行激光烧蚀的Li-W共沉积层表面上的元素W峰更为明显。 。摘要锂化通过减少氢和通过锂(Li)壁调理处理的杂质再循环,有利于增强EAST中的等离子体性能。诸如钨(W)之类的高Z材料已被选作EAST托卡马克的上偏滤器。然而,Li-W共沉积层上化学组成和状态的性质仍不清楚。本文通过级联电弧线性等离子体发生器进行了具有Li沉积层的纯W等离子体面对组分的实验。开发了空间分辨率约为1mm,深度分辨率约为200nm的原位激光诱导击穿光谱(LIBS)系统,以实时监测Li-W共沉积层的组成和分布。共沉积层和激光烧蚀斑的化学状态通过X射线光电子能谱(XPS)的事后分析确定。 LIBS和XPS结果均表明,在靠近Li源的区域可以观察到较高的Li浓度。 XPS光谱表明,在289eV和531.6eV处的Li 2 CO 3峰强度随Li分布而明显改变。另外,在锂化的W样品中的Li-W共沉积层的表面上形成了高比例的W氧化物。在没有激光烧蚀的Li-W共沉积层表面区域中,对应于激光烧蚀点的元素W信号比它们明显得多。这项工作可以增进对EAST托卡马克钨分流器锂壁调节的理解。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号