Combined Machining of Ti-6Al-4V Alloy Using Electrochemical Milling and Electrochemical Grinding

摘要

Ti-6Al-4V is a typical difficult-to-cut material with which it is difficult to achieve a high processingefficiency and good surface quality simultaneously using a single processing method. In this paper, acombined method that consists of electrochemical milling and grinding is proposed to solve this problem.Two types of electrodes were used in the different machining stages. First, the polarization curves forTi-6Al-4V in 10% NaNO 3 solution were obtained. Then, the maximum feed and material removal rateswere studied using various electrochemical milling parameters. The resulting machined groove cross-sectional profiles were compared. Finally, the effects of electrochemical grinding on the machiningresults were investigated. The machined workpiece surfaces were examined using scanning electronmicroscopy and their roughnesses were measured using a roughometer.