...
首页> 外文期刊>International Journal of Electrochemical Science >Electrochemical Sensor Based on Self-doped Polyaniline with Guest-induced Binding Sites for Detection of Lead(II) Ion
【24h】

Electrochemical Sensor Based on Self-doped Polyaniline with Guest-induced Binding Sites for Detection of Lead(II) Ion

机译:基于自掺杂聚苯胺和客体诱导结合位点的电化学传感器用于铅(II)离子的检测

获取原文
           

摘要

An electrochemical approach towards developing a lead(II) ion selective polymer is presented. Apoly(aniline-co-3-aminobenzenesulfonic acid), P(Ani-co-3ABSA), membrane would be reconciled withthe peculiarities of lead(II) ions by incorporating them. It seems that consecutive embedding/ejecting oflead(II) into-from the mass of P(Ani-co-3ABSA) coating, correspondingly templates the coating towardslead(II) ion. This method results in a highly selective sensor for the measurement of lead(II) ion. Theoptimal conditions for sensor operation were ascertained. The surface morphology of the freshlysynthesized, templated and templated-preconcentrated P(Ani-co-3ABSA) membranes were explored bySEM. The interference effect on the voltammetric response with coexisting ions was also investigated.The developed sensor was applied for lead(II) determination by pre-concentration/differential pulse-anodic stripping voltammetry in concentrations of 1.0 nM to 0.1 mM and by potentiometric method inconcentrations of 10.0 nM to 1.0 mM.
机译:提出了一种开发铅(II)离子选择性聚合物的电化学方法。聚(苯胺-co-3-氨基苯磺酸),P(Ani-co-3ABSA)膜将通过与铅(II)离子的特殊性相协调。似乎连续从P(Ani-co-3ABSA)涂层中嵌入/注入铅(II)相应地使涂层朝向铅(II)离子模板化。这种方法导致了用于测量铅(II)离子的高选择性传感器。确定了传感器操作的最佳条件。通过SEM探索了新合成的,模板化和模板化预浓缩的P(Ani-co-3ABSA)膜的表面形态。还研究了这种干扰对共存离子对伏安响应的影响。开发的传感器用于浓度为1.0 nM至0.1 mM的预浓缩/微分脉冲阳极溶出伏安法和电位计法测定铅中的铅(II) 10.0 nM至1.0 mM。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号