Continuando con los trabajos sobre investigación del comportamiento resistente de elementos estructurales de hormigón armado reforzados, se trata en la presente ocasión de analizar la resistencia a la flexión de vigas reforzadas por dos métodos diferentes. En el primero se utiliza hormigón armado reforzando la viga por debajo del forjado en sus laterales y fondo. El segundo consiste en pegar dos chapas delgadas en los laterales de la viga, por debajo igualmente del forjado. Los dos métodos han probado ser eficaces, y en lo que sigue se describen las vigas y refuerzos ensayados, su comportamiento y forma de rotura, y se dan datos relativos a las distintas fases de los ensayos junto con algunas conclusiones obtenidas.↓The present paper deals with the flexural strength of girders reinforced by two different methods, as the following part of the research work on the bearing behavior of reinforced concrete structural elements. The first method uses the reinforced concrete to strengthen the girder under the floor construction, in both sides and at the bottom. The second consists in attaching two thin sheets to the sides of the girder, also under the floor construction. Both methods have been proven efficient, and the paper follows with a description of the beams and reinforcements tested, their behaviour and their failure mode and information is given on the different testing stages together with some of the conclusions.
展开▼