Evaluation of a Simplified Method to Estimate the Peak Inter-Story Drift Ratio of Steel Frames with Hysteretic Dampers

摘要

In this paper, a simplified method is proposed to estimate the peak inter-story drift ratios of steel frames with hysteretic dampers. The simplified method involved the following: (1) the inelastic spectral displacement is estimated using a single-degree-of-freedom (SDOF) system with multi-springs, which is equivalent to a steel frame with dampers and in which multi-springs represent the hysteretic behavior of dampers; (2) the first inelastic mode vector is estimated using a pattern of story drifts obtained from nonlinear static pushover analysis; and (3) the effects of modes higher than the first mode are estimated by using the j th modal period, j th mode vector, and j th modal damping ratio obtained from eigenvalue analysis. The accuracy of the simplified method is estimated using the results of nonlinear time history analysis (NTHA) on a series of three-story, six-story, and twelve-story steel moment resisting frames with steel hysteretic dampers. Based on the results of a comparison of the peak inter-story drift ratios estimated by the simplified method and that computed via NTHA using an elaborate analytical model, the accuracy of the simplified method is sufficient for evaluating seismic demands.