首页> 外文期刊>Analytical methods >Development of a microwave-assisted digestion method for the rapid determination of chloride and fluoride in nuclear-grade boron carbide powders
【24h】

Development of a microwave-assisted digestion method for the rapid determination of chloride and fluoride in nuclear-grade boron carbide powders

机译:微波消解法快速测定核级碳化硼粉中氯和氟的开发

获取原文
       

摘要

A simple and efficient microwave-assisted digestion (MAD) method for the rapid determination of chloride and fluoride in nuclear-grade boron carbide powders has been developed using a closed microwave-vessel (G30, Anton Parr) and a domestic microwave oven. Parameters optimized to get quantitative recoveries of chloride and fluoride were extractant concentration, microwave power, irradiation time and amount of the sample. The optimized MAD conditions for quantitative recovery of chloride and fluoride were obtained by irradiating ~0.5 g of sample in 10 mL of 10% HNO3 (v/v) for about 30 s at a microwave power of 480 W. After completion of the extraction process, the sample mixture was centrifuged and then a known volume of the sample extract (clear supernatant) was transferred to another pre-cleaned tube for subsequent analyses of Cl and F using an ion-selective electrode (ISE). A pyro-hydrolysis method was used for validation of the results of the proposed MAD method. The LOD values for chloride and fluoride in conjunction with the proposed MAD were found to be 1.9 μg g?1 and 1.2 μg g?1 respectively with a relative standard deviation (RSD) of less than 10%. The studies have demonstrated that the proposed microwave-based approach constitutes a good alternative sample preparation methodology for the determination of chloride and fluoride in nuclear-grade boron carbide powder samples...
机译:已经开发了一种使用封闭的微波容器(G30,Anton Parr)和家用微波炉快速测定核级碳化硼粉末中氯化物和氟化物的简便有效的微波辅助消解方法。为获得氯化物和氟化物的定量回收率而优化的参数是萃取剂浓度,微波功率,照射时间和样品量。通过在480 W的微波功率下,在10 mL的10%HNO3(v / v)中照射约0.5 g的样品约30 s,可获得用于定量回收氯和氟的最佳MAD条件。然后,将样品混合物离心,然后将已知体积的样品提取物(澄清的上清液)转移到另一个预先清洁的管中,以便随后使用离子选择电极(ISE)分析Cl和F。使用热解方法对所提出的MAD方法的结果进行验证。氯化物和氟化物与拟议的MAD的LOD值分别为1.9μgg?1和1.2μgg?1,相对标准偏差(RSD)小于10%。研究表明,所提出的基于微波的方法是测定核级碳化硼粉末样品中氯化物和氟化物的一种很好的替代样品制备方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号