...
首页> 外文期刊>Advances in Interventional Cardiology: Postepy w Kardiologii Interwencyjnej >A new manoeuvre for overcoming extreme brachiocephalic artery tortuosity in radial coronary angiography
【24h】

A new manoeuvre for overcoming extreme brachiocephalic artery tortuosity in radial coronary angiography

机译:在radial动脉冠状动脉造影中克服极端头臂动脉曲折的新方法

获取原文

摘要

The radial approach has a?class II recommendation in percutaneous coronary interventions for decreasing access site complications [1]. Radial coronary intervention is being used more in recent years. The radial approach has some limitations that are not seen in the femoral approach. Severe subclavian artery tortuosity and distal origin of the innominate artery result in a?decreased forward force and increased friction during the progression of the wire or guide in the ascending aorta, which usually resolves with the use of a?hydrophilic wire combined with deep breathing [2]. However, when subclavian artery and severe brachiocephalic artery tortuosity combines, the cannulation of the coronary arteries may be difficult. A?75-year-old male patient had moderate-degreesubclavian and severe brachiocephalic tortuosity that allowed left coronary cannulation and angiogram with a?Judkins L 3.5 diagnostic catheter from the right radial approach (Figures 1 A, B). However, it was impossible to advance the right Judkins catheter down to the right sinus Valsalva and rotate it with even stiffer wires with the above manoeuvre (Figure 1 C). Then the technician held the patient’s right forearm, which was positioned 10–20° caudally in the cranio-caudal plane (70–80-degree caudal angle with the body) and pulled the right arm to 50–60° cranially and slightly superior to the first position (Figures 2 A, B). Our aim was to correct some degree of the tortuosity of the subclavian and brachiocephalic arteries by using changes in the body and extremity positions to create a?more flat path for the catheter to move along. After the manoeuvre, the right arm was held by the technician approximately 40–50° cranially in the cranio-caudal plane, so that it was possible to advance the right Judkins catheter through the entire ascending aorta and easily rotate it clockwise for RCA cannulation (Figure 1 D). To our knowledge, this manoeuvre has not been described before for similar situations in right radial coronary angiography. Changes in anatomic positions of the body may help the interventional team in handling anatomical problems of the vessels. References 1. Levine GN, Bates ER, Blankenship JC, et al. 2011 ACCF/AHA/SCAI Guideline for Percutaneous Coronary Intervention: a?report of the American College of Cardiology Foundation/American Heart Association Task Force on Practice Guidelines and the Society for Cardiovascular Angiography and... View full text...
机译:per动脉入路在经皮冠状动脉介入治疗中具有II类推荐,可减少进入部位的并发症[1]。近年来,越来越多地采用ial动脉冠状动脉介入治疗。 radial骨入路有一些局限性,在股骨入路中是看不到的。锁骨下动脉严重曲折以及无名动脉的远端起源会导致钢丝或导丝在升主动脉的过程中前进力降低,摩擦增大,这通常可以通过使用亲水性钢丝结合深呼吸来解决[ 2]。但是,当锁骨下动脉和严重的头臂动脉曲折相结合时,冠状动脉的插管可能会很困难。一名75岁的男性患者患有中度锁骨下和严重的头臂弯曲性,允许通过右radial骨入路使用a?Judkins L 3.5诊断导管进行左冠状动脉插管和血管造影检查(图1 A,B)。但是,不可能通过上述操作将右Judkins导管向下推进到右窦Valsalva并用更硬的钢丝旋转它(图1 C)。然后,技术人员握住患者的右前臂,将其在颅尾平面中位于尾部10–20°(与身体的尾部角度为70–80度),然后将右臂向后方拉至50–60°,并略微高于第一位置(图2 A,B)。我们的目的是通过利用身体和四肢位置的变化来矫正锁骨下动脉和头颅动脉的某种程度的曲折,为导管移动提供更平坦的路径。手术后,技术人员将右臂在颅尾平面内约40–50°颅骨抓握,这样就可以使右Judkins导管穿过整个升主动脉,并轻松地顺时针旋转以进行RCA插管(图1D)。据我们所知,对于右侧radial动脉冠状动脉造影术中的类似情况,以前没有描述过这种动作。身体解剖位置的变化可能有助于介入团队处理血管的解剖问题。参考文献1. Levine GN,Bates ER,Blankenship JC等。经皮冠状动脉介入治疗的2011 ACCF / AHA / SCAI指南:美国心脏病学会基金会/美国心脏协会实践指南工作组与心血管血管造影和心血管病学会的报告...查看全文...

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号