A Comparative in Vitro Study of Power Output Deterioration over Time Between Ho:YAG Laser Fibers from Different Manufacturers as a Function of Deflection and Power Input

摘要

Objectives: To investigate the performance of laser fibers from 6 major manufacturers in vitro and to identify the effect of time and angulations (180° and 0°) on fiber power output. Materials and Methods: Overall, 36 single-use fibers were used. Each was tested with an energy input of 0.8, 1.4 and 2.0 Joules. A power detector measured power output after 1, 5, 10 and 15 minutes for three 15-minute cycles of continuous use. For the first 2 cycles, the fiber was bent to 180° with the use of a pre fabricated mould. Analysis of the data was performed by ANOVA and Tukey's test when the results were significant amongst groups. Statistical significance was deemed p Results: No fiber fracture occurred. There was no significant difference in output at 15 minutes of continuous use at 0° and 180°. The reduction in energy output at the 15th minute of continuous use at 180° was not significant for any fiber type or initial input. Only output differences between the fibers proved to be significant (p = 0.001). Conclusion: Fiber fracture and decline in performance is not due to deflection and continuous use. Frictional forces that occur between the fiber tip and the stone fragments may be responsible. ? 2016 S. Karger AG, Basel.